Kuppersberg WD 1488 - Инструкция по эксплуатации - Страница 15

15

ENGLISH

TECHNICAL PASSPORT

Washing Dryer Machines

PROGRAMME selector with OFF 

position

When the programme selector is 

turned the display lights up to show the 
settings for the programme selected.

For energy saving, at the end of the 

cycle or with an inactivity period, the 
display level contrast will decrease.

N.B.: To switch the machine off, turn the 

programme selector to the OFF position.



Press the START/PAUSE button to 

start the selected cycle.



Once a programme is selected 

the programme selector remains 
stationary on the selected programme 
till cycle ends.



«End» will appear in the display 

at the end of the program and the 
DOOR LOCKED light will go off, it is now 

possible to open the door.



Switch off the washing machine 

by turning the selector to OFF.

The programme selector must be 

returned to the OFF position at the 

end of each cycle or when starting a 

subsequent wash cycle prior to the next 

programme being selected and started.

 START/PAUSE  button

Close the door BEFORE selecting the 

button START/PAUSE.



Press to start the selected cycle.

When the START/PAUSE button has 

been pressed, the appliance can take 

few seconds before it starts working.

ADD OR REMOVE ITEMS 

AFTER THE PROGRAMMES HAS 

STARTED (PAUSE)



Press and hold the START/PAUSE 

button  for  about  2  seconds  (some 

indicator light and the time remaining 

indicator  will  fl ash,  showing  that  the 

machine has been paused).



Wait until the DOOR LOCKED 

light  has  gone  out  before  opening  the 

door.

Before you open the door, please check 

water level is below the door opening 

to avoid fl ooding.



After you have added or removed 

items, close the door and press the 

START/PAUSE  button  (the  programme 

will start from where it left off).

CANCELLING THE PROGRAMME



To cancel the programme, set the 

selector to the OFF position.



Wait 2 minutes until the safety 

device unlocks the door.

DELAY START button



This  button  allows  you  to  pre-

programme the wash cycle to delay the 

start of the cycle for up to 24 hours.



To delay the start use the 

following procedure:



Select the required 

programme.



Press  the  delay  start  button 

once  to  activate  it  (h00  appears  on 

the  display)  and  then  press  it  again  to 

set a 1 hour delay (h01 appears on the 

display). The  pre-set  delay  increases  by 

1 hour each 

time the button is pressed,