Kuppersberg WD 1488 - Инструкция по эксплуатации - Страница 16

16

TECHNICAL PASSPORT

ENGLISH

Washing Dryer Machines

until h24 appears on the display, at 

which  point  pressing  the  button  again 

will reset the delay start to zero.



Confi rm  by  pressing  the 

START/PAUSE  button.  The  delay 
countdown  will  begin  and  when  it 
has  fi nished  the  programme  will  start 

automatically.



It is possible to cancel the delay 

start by turning the programme selector 

to OFF.

If there is any break in the power supply 

while the machine is operating, a special 

memory stores the selected programme 

and, when the power is restored, it 

continues where it left OFF.

The option buttons should be selected 

before pressing the START/PAUSE 

button. If an option is selected that 

is not compatible with the selected 

programme then the option indicator 

light fi  rst fl  ashes and then goes off.

 OPTIONS  button

This  button  allows  you  to  choose 

between three different options:

DRYING SELECTION button



For automatic washing/drying 

cycle:  after  the  selection  of  washing 

programme according to laundry type, 

select  a  degree  of  dryness  by  pressing 
this  button.  At  the  end  of  the  washing 

programme, the selected drying cycle 
will start automatically.

If a washing programme is not 

compatible with automatic drying 

selected, this function will not be 

activated.

If you exceed the maximum dryable load 

of laundry indicated in the programme 

table, the laundry may not be dried 

satisfactory.



If you want delete the selection 

before  the  programme  starts,  please 

press  repeatedly  the  button  until 

the lights go off or reposition the 

programme selector to the OFF position.



Drying only cycle:

select  via  the  knob  the  desired 

drying  programme  in  conjunction  with 

your  fabrics,  by  pressing  this  button  it 

is possible to select a degree of dryness 

that is different to the default one 

(except for the wool drying programme).



To cancel the cycle during the 

drying  phase,  please  press  the  button 

for about 3 seconds.

 WARNING:

After cancelling the drying 

programme, the cool down phase 

will begin and please wait for about 

10/20  minutes  before  opening  the 

door.



“End”  will  appear  in  the  display 

at the end of the program and the 
DOOR LOCKED light will go off, it is now 

possible to open the door. 

It is also possible to cancel the drying 

cycle by turning the programme selector 

to the OFF position. It is necessary to 

wait for the cooling phase’s end (10/20