Kraft KF-MDS7107G - Инструкция по эксплуатации - Страница 43

43

USER GUIDE

AUTOMATIC WASHING MACHINE

E 2

Door lock malfunction

The door is not closed in place, and the door lock does not work 
normally. Close the door again, Press POWER button to turn off the 
power supply, and then Press POWER button and then press the 
START/PAUSE button to restart the program. Eliminate this fault 
causes. If the fault code still exists, please contact the service center 
for repair. If the fault code displays and cannot open the door, door 
lock may be failure, please contact the service center for repair.

E 3

Motor failure

Switch off the appliance, wait until it has cooled down and switch it 
on again after troubleshooting.

E 4

Abnormal
water drainage

Clean the pump filter.
Check whether the drain hose is bent, twisted or blocked? Eliminate 
the above fault
causes. If the fault code still exists, please contact the service center 
for repair.

E 5

Water overflow alarm

Switch off the appliance, close the water tap and disconnect the 
appliance from the mains (unplug).
Please contact  the aftersales service! These causes / measures 
must be remedied or carried out by the aftersales service only! 
Automatic  reset after power failure or trouble- shooting.

E 6

Heating failure

Press the START/PAUSE button to suspend the appliance operation 
and wait for several minutes. When the temperature in the drum 
drops to a safe range and the fault code on the display is removed, 
press the START/PAUSE button to continue the rest of the program. 
If the fault code still exists, please contact the service center for 
repair.

E 7

Failure of the 
temperature sensor of 
the heating

Switch off the appliance, close the water tap and disconnect the 
appliance from the mains (unplug).
Please contact  the aftersales service! These causes / measures 
must be remedied or carried out by the aftersales service only! 
Automatic  reset after power failure or trouble- shooting.

E 8

Communication error of 
the inverter 

UNB

UNBALANCE NO SPIN

Switch off the appliance, reload laundry, switch  on the appliance 
again and restart the programme.

 ATTENTION! If the error persists, contact an authorized service center.

DISPOSAL 

Before disposal, the washing machine should be completely unusable for safety 
reasons. Remove the plug of the power cable from the wall outlet, cut the power 
cable  as  close  to  the  wall  of  the  device  as  possible,  and  remove  the  door  so 
that children do not lock themselves or get an electric shock while playing. The 

appliance  cannot  be  disposed  of  together  with  ordinary  household  waste.  To  prevent 
possible  health  and  environmental  hazards,  the  product  must  be  disposed  of  as  part 
of an approved disposal process. In the future, you should act in accordance with local 
regulations regarding the disposal of waste and garbage.