Ardesto JEG-800 - Инструкция по эксплуатации - Страница 18

18

EN

the residue barrel to overfill as this may cause the unit to stall.

6.  Plug the power cord into an electrical outlet and turn the 

power  on “I”.

7.  Once the juicer is on, place the fruits and vegetables into 

the feeding tube and use pushing bar to drive them down 

slowly. In order to extract the maximum amount of juice, 

it is important to push the pushing bar slowly.

8.  The juice extractor will separate the juice and residue 

in the juicer jug and barrel automatically while you are 

juicing.

Note: Never use hand or fingers to push food down into 

the feeding tube or clean the feeding tube, always use 

the pushing bar provided.

OPERATION TIME

This juice extractor is designed with rotation switches of O 

grading, I grading, II grading (O for stop, I for weak grading, 

II for strong grading). For juicing hard fruits, select strong 

grading II, after operating for 1 min, stop for 1 min, then use 

again. After above operation is performed for three times,

stop for 15 min, do not operate until the motor is cool down. 

In this way, service life of this device would be prolonged and 

it will serve you more efficiently.

AFTER USING YOUR JUICE EXTRACTOR

Before cleaning and storing your juice extractor, follow the 

instructions below to disassemble the unit:

1.  Turn juice extractor off “O” and unplug it from the 

electrical outlet.

2.  Unlock the safety locking arm and move it down to 

release the transparent cover.

3.  Lift the transparent cover up and remove it from the 

device.