Соковыжималки Ardesto JEG-800 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

14
EN
and sparks will disappear.
24. To avoid damage during use, do not put hard foods (such
as nuts), high-fiber foods (such as sugar cane), non-juicy
fruits (such as bananas) into the juicer.
25. If products are stuck in the loading hole, do not push
them through with your fingers, but use a pusher. If the
fruit/vegetables are stuck and you cannot push them
through with the pusher, turn off the appliance and
disassemble it to remove the remaining fruit/vegetables.
26. Make sure that hard objects do not fall into the loading
hole - this can damage the device. To avoid injury, do not
put your fingers in the loading hole.
27. To avoid injury, avoid contact with moving parts of the
device.
28. It is forbidden to use the device empty (without
products) or to overload it.
29. Do not leave the device unattended when it is in
operation. Close supervision is required if the device is
used by or around children.
30. When making juice, make sure that the juice collector
and pulp container are not overflowing. If they are full,
turn off and clean the device.
31. Before pouring the juice from the bowl, disconnect the
device from the electrical network.
32. In order to extend the service life of the juicer,
overheating protection is installed in the motor. If the
motor runs for a long period of time or is overloaded,
the overheat protection is triggered and the device
automatically shuts down. After stopping the motor,
remove the plug from the outlet, wait until the motor
cools down (about 30 minutes), then turn on the juicer
again.
33. Unplug the device after each use.
34. Unplug the device when not in use, before removing or
installing parts, and before cleaning the device.
35. Always turn the switch to the OFF position after use.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)