Системы видеонаблюдения Samsung SCC-C4207P - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
26
E
25
✔
AUTO...
Depending on illumination, it is automatically switched to
the COLOR or BW mode. In the poor illumination
environment, turns IR Filter off to convert to the Black-and-
White mode for better sensitivity and in the good
illumination environment, turns it on to convert to the
COLOR mode for worse sensitivity. Select AUTO and press
[Enter] and the AUTO BW submenu will appear to control
the BW level. Depending on ON or OFF, the BURST signal
may output or no. It also sets up the duration for conversion
and the brightness level for the conversion from the COLOR
mode to the BW mode. Duration options are 10Sec.,
30Sec., 1Min., and 5Min.. In the BW mode, the WHITE BAL
menu will be marked --- to make setup unavailable.
(AUTO)
BURST
ON
LEVEL
MEDIUM
DURATION
S ---I--- L
RET
CAMERA ID
OFF
IRIS
ALC...
SHUTTER
OFF
AGC ---
WHITE BAL
ATW1
FOCUS MODE
AF
MOTION DET
OFF
COLOR/BW
AUTO...
PRIVACY
OFF
SPECIAL
...
PRESET
...
EXIT
QUIT
Press the
ENTER
button.
❖
In AUTO mode, AGC will be displayed as “---“. You can’t adjust
the settings manually.
- ALARM ON : It sends out signals through the ALARM output
port in the BW mode.
- ALARM OFF : The ALARM output port is synchronized with the
MOTION DET finction regardiess of the COLOR/BW mode.
- BURST ON : The color burst signal is output together with
black and white composite video signal.
BURST OFF : The color burst signal is not output.
- LEVEL : You can set the brightness level that changes from
COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and HIGH.
- DWELL TIME : Set the HOLDING time for switching
between COLOR and BW mode depending the changes in
the amount of light. You can set the HOLDING time to 10sec
(S), 30sec, 60sec, or 300sec( L).
❙
COLOR / BW
COLOR/BW turns IR(Infrared) Filter on or off. In the poor
illumination environment, turns IR Filter off to raise the
sensitivity to the same level as an black-and-white camera while
in the good illumination environment, turns it on to convert to the
COLOR mode in the normal screen condition to lower the
sensitivity.
✔
COLOR
This is the IR Filter ON mode with a normal color screen.
You can press the [Enter] key to set the COLOR GAIN
LEVEL. And when the AGC function is on, you can set the
AGC COLOER LEVEL.
✔
BW...
This is the IR Filter OFF mode, black-and-white (with the
same sensitivity as a black-and-white camera). Select BW...
and press [Enter] and the BW submenu will appear. You
may determine to sent out BURST signals by ON or OFF
setting in this submenu.
❖
WHITE BAL will be marked --- so that setup is unavailable.
(BW)
BURST
OFF
RET
CAMERA ID
OFF
IRIS
ALC...
SHUTTER
OFF
AGC LOW
WHITE BAL
---
FOCUS MODE
AF
MOTION DET
OFF
COLOR/BW
BW...
PRIVACY
OFF
SPECIAL
...
PRESET
...
EXIT
QUIT
Press the
ENTER
button.
Press the
ENTER
button.
CAMERA ID
ON...
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL
ATW
FOCUS MODE
AF
MOTION DET
OFF
COLOR/BW COLOR...
PRIVACY ...
SPECIAL ...
PRESET
...
EXIT QUIT
(COLOR)
GAIN
(0)I--------
AGC COLOR
(0)----I----
RET
