STATUS DP-1051 02142601 - Инструкция по эксплуатации - Страница 5

5

SPECIFIC SAFETY INSTRUCTIONS

EN

• 

Use  the  power  tool,  accessories  and tool  bits  etc.  in  accordance  with  these 

instructions,  taking  into  account  the working  conditions  and  the  work  to  be 

performed. 

 Use  of  the  power  tool  for  op-erations different from those intended could 

result in a hazardous situation.

SERVICE

• 

Have your power tool serviced by a qualified repair person using only identical 

replacement parts.

This will ensure that the safety of the power tool is maintained.

• 

Wear ear protectors with impact drills. Exposure to noise can cause hearing 

loss.

• 

Use the auxiliary handle supplied with the machine. Loss of control can cause 

personal injury.

• 

During operation provide eye protection to prevent eyes from exposure to 

flying particles. Wear goggles.

• 

Take protective measures against inhalation of dust. Some materials can 

contain toxic ingredients. Wear a dust mask and work with dust/chip 

extraction when connectable.

• 

Hold the power tool by insulated gripping surfaces only, when performing an 

operation where the cutting accessory may contact hidden wiring or its own cord. 

Cutting accessory contacting a “live” wire may make exposed metal parts of the power 

tool “live” and could give the operator an electric shock.

• 

Do not process materials containing asbestos. Asbestos is considered carcinogenic.

• 

WARNING

: Before connecting a tool to a power source be sure that the voltage supply 

is the same as that specified on the nameplate of the tool.

• 

A power source with a voltage greater than that specified for the tool can result in 

serious injury to the user, as well as damage to the tool.

• 

If in doubt, do not plug in the tool.

• 

Using a power source with a voltage less than the nameplate rating is harmful to the 

motor.

• 

Fully unwind cable drum extensions to avoid potential overheating.

• 

When an extension cable is required, you must ensure that it has the right ampere 

rating for your power tool and it is in safe electrical condition.

• 

WARNING

: Always switch off and unplug the power tool prior to any adjustment, 

servicing or maintenance.

• 

While operating the machine, always hold it firmly with both hands and provide for a 

secure stance. The power tool is guided more securely with both hands.

SPECIFIC SAFETY INSTRUCTIONS