Stanley SDH600C - Инструкция по эксплуатации - Страница 7

ENGLISH  

(Original instructions)

7

SDH600

Level of sound pressure according to EN 60745:

Sound pressure (LpA) 97.0 dB(A), uncertainty (K) 3 dB(A)

Sound power (LWA) 108.0 dB(A), uncertainty (K) 3 dB(A)

Vibration emission value ah:

ah,ID = m/s² 8.2
ah,D = m/s² 3.7
Uncertainty K = m/s² 1.5

SDH700

Level of sound pressure according to EN 60745:

Sound pressure (LpA) 100.0 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 110.0 dB(A), uncertainty (K) 3 dB(A)

Vibration emission value ah:

ah,ID = m/s² 8.7
ah,D = m/s² 3.8
Uncertainty K = m/s² 1.5

Vibration

The declared vibration emission values stated in the 

technical data and the declaration of conformity have been 

measured in accordance with a standard test method 

provided by EN 60745 and may be used for comparing one 

tool with another. The declared vibration emission value 

may also be used in a preliminary assessment of exposure.

Warning!

 The vibration emission value during actual use of 

the power tool can differ from the declared value depending 

on the ways in which the tool is used. The vibration level 

may increase above the level stated.
When assessing vibration exposure to determine safety 

measures required by 2002/44/EC to protect persons 

regularly using power tools in employment, an estimation 

of vibration exposure should consider, the actual conditions 

of use and the way the tool is used, including taking 

account of all parts of the operating cycle such as the times 

when the tool is switched off and when it is running idle in 

addition to the trigger time.

Service Information

STANLEY offers a full network of company-owned and/

or authorized service agents throughout your country. 

All STANLEY Service Centers are staffed with trained 

personnel to provide customers with efficient and reliable 

power tool service. Whether you need technical advice, 

repair, or genuine factory replacement parts, contact the 

STANLEY location nearest to you.

EC declaration of conformity

MACHINERY DIRECTIVE

SDH600-SDH700 - Impact Drills

Stanley Europe declares that these products described under 

“technical data” are in compliance with:

2006/42/EC, EN 60745-1:2009 + A11:2010, EN 60745-2-1: 2010

These products also comply with Directive 2004/108/EC (until 

19/04/2016) 2014/30/EU (from 20/04/2016) and 2011/65/EU. 

For more information, please contact Stanley Europe at the 

following address or refer to the back of the manual.

The undersigned is responsible for compilation of the technical 

file and makes this declaration on behalf of Stanley Europe.

Ray Laverick

Engineering Manager

Stanley Europe, Egide Walschaertsstraat 14-18,

2800 Mechelen, Belgium

08/2015

TWO YEAR WARRANTY

If your STANLEY product becomes defective due to faulty 

materials or workmanship within 24 months from the date 

of purchase, STANLEY guarantees to replace all defective 

parts free of charge or – at our discretion – replace the unit 

free of charge provided that:

♦

The product has not been misused and has been used 

in accordance with the instruction manual;

♦

The product has been subject to fair wear and tear;

♦

Repairs have not been attempted by unauthorized 

persons;

♦

Proof of purchase is produced;

♦

The STANLEY product is returned complete with all 

original components;

♦

The product hasn’t been used for hire purposes.

If you wish to make a claim, contact your seller or check 

the location of your nearest authorised STANLEY repair 

agent in the STANLEY catalogue or contact your local 

STANLEY office at the address indicated in this manual. A 

list of authorised STANLEY repair agents and full details 

of our after sales service is available on the internet at: 

www.2helpU.com