Stanley SDH600C - Инструкция по эксплуатации - Страница 4

ENGLISH  

(Original instructions)

4

d.   Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained 

users.

e.   Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may affect the power tools 

operation. If damaged, have the power tool repaired 

before use. 

Many accidents are caused by poorly 

maintained power tools.

f.   Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

g.   Use the power tool, accessories and tool bits etc. 

In accordance with these instructions, taking into 

account the working conditions and the work to 

be performed. 

Use of the power tool for operations 

different from those intended could result in a 

hazardous situation.

5.  Service

a.   Have your power tool serviced by a qualified repair 

person using only identical replacement parts. 

This will ensure that the safety of the power tool is 

maintained.

Additional power tool safety warnings 

Warning! Additional safety warnings for drills and 

impact drills 

♦

Wear ear protectors when impact drilling.

 Exposure 

to noise can cause hearing loss. 

♦

Use auxiliary handle(s) if supplied with the tool.

Loss of control can cause personal injury. 

♦

Hold power tool by insulated gripping surfaces 

when performing an operation where the cutting 

accessory may contact hidden wiring or its own 

cord.

 Cutting ac cessory contacting a “live” wire may 

make exposed metal parts of the power tool “live” and 

could give the operator an electric shock.

♦

Use clamps or another practical way to secure 

and sup port the workpiece to a stable platform.

Holding the work by hand or against your body leaves it 

unstable and may lead to loss of control. 

♦

Before drilling into walls, floors or ceilings, check for the 

location of wiring and pipes. 

♦

Avoid touching the tip of a drill bit just after drilling, as it 

may be hot. 

♦

The intended use is described in this instruction 

manual. The use of any accessory or attachment or 

performance of any operation with this tool other than 

those recommended in this instruction manual may 

present a risk of personal injury and/or damage to 

property.

Residual risks.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

♦

Injuries caused by touching any rotating/moving parts.

♦

Impairment of hearing.

♦

Risk of injury when changing any parts, or accessories.

♦

Health hazards caused by breathing dust developed 

when sawing wood, especially oak, beech and MDF.

♦

Injuries caused by prolonged use of a tool. When using 

any tool for prolonged periods ensure you take regular 

breaks.

Safety of others

This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their 

safety.
Children should be supervised to ensure that they do not 

play with the appliance.

Labels on tool

The label on your tool may include the following symbols:

Warning!

 To reduce the risk of injury, the user must 

read the instruction manual.

Always wear safety goggles

Always wear safety hearing protection

Position of date barcode

The Date Code, which also includes the year of 

manufacture, is printed into the housing.
Example:

2015 XX ZY

Year of manufacturing

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

♦

If the supply cord is damaged, it must be replaced by 

the manufacturer or an authorised STANLEY Service 

Centre in order to avoid a hazard.