SPARKY BUR2 18Li HD 12000193887 - Инструкция по эксплуатации - Страница 9

4

BR2 18Li HD • BUR2 18Li HD

EN

General power tool  

safety warnings

WARNING!

Read all safety warnings and 

all instructions. Failure to follow the warnings and 

instructions  may  result  in  electric  shock,  fire  and/or 

serious injury. 

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to your 
mains-operated (corded) power tool or battery-operated 
(cordless) power tool.

1. WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or 

dark areas invite accidents.

b)  Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable 
liquids, gases or dust. Power tools create sparks 
which may ignite the dust or fumes.

c) Keep children and bystanders away while op-

erating a power tool. Distractions can cause you 
to lose control.

2. ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools. Un-
modified plugs and matching outlets will reduce risk of 
electric shock.

b) Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 
refrigerators. There is an increased risk of electric 
shock if your body is earthed or grounded.

c)  Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the 
risk of electric shock.

d) Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.

e)  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. Use of 
a cord suitable for outdoor use reduces the risk of 
electric shock.

f)  If operating a power tool in a damp location 

is unavoidable, use a residual current device 
(RCD) protected supply. Use of an RCD reduces 
the risk of electric shock.

3. PERSONAL SAFETY

a) Stay alert, watch what you are doing and use 

common sense when operating a power tool. 
Do not use a power tool while you are tired or 
under the influence of drugs, alcohol or medi-
cation.  A moment of inattention while operating 
power tools may result in serious personal injury.

b) Use personal protective equipment. Always 

wear eye protection. Protective equipment such as 
dust mask, non-skid safety shoes, hard hat, or hear-
ing protection used for appropriate conditions will 
reduce personal injuries.

c) Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool. Carrying power tools with 
your finger on the switch or energising power tools 
that have the switch on invites accidents.

d) Remove any adjusting key or wrench before 

turning the power tool on. A wrench or a key left 
attached to a rotating part of the power tool may 
result in personal injury.

e)  Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of 
the power tool in unexpected situations.

f)  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of 

dust extraction and collection facilities, en-
sure these are connected and properly used. 
Use of dust collection can reduce dust-related haz-
ards.

4. POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct 

power tool for your application. The correct 
power tool will do the job better and safer at the 
rate for which it was designed.

b) Do not use the power tool if the switch does 

not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous and 
must be repaired.

c) Disconnect the plug from the power source 

and/or the battery pack from the power tool 
before making any adjustments, changing ac-
cessories, or storing power tools. Such preven-
tive safety measures reduce the risk of starting the 
power tool accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 
the power tool or these instructions to operate 
the power tool. Power tools are dangerous in the 
hands of untrained users.

e)  Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have the 
power tool repaired before use. Many accidents 
are caused by poorly maintained power tools.

f)  Keep cutting tools sharp and clean. Properly 

maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, tak-
ing into account the working conditions and 
the work to be performed. Use of the power tool 
for operations different from those intended could 
result in a hazardous situation.

pages BR2-BUR2-18Li HD-2017.indd   4

9.2.2018 г.   10:26:59