SPARKY BUR2 18Li HD 12000193887 - Инструкция по эксплуатации - Страница 10

5

Original instructions

EN

5. BATTERY TOOL USE AND CARE

a) Recharge only with the charger specified by 

the manufacturer. A charger that is suitable for 
one type of battery pack may create a risk of fire 
when used with another battery pack.

b) Use power tools only with specifically desig-

nated battery packs. Use of any other battery 
packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 
coins, keys, nails, screws or other small metal 
objects, that can make a connection from one 
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.

d) Under abusive conditions, liquid may be eject-

ed from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help. 
Liquid ejected from the battery may cause irritation 
or burns.

6. SERVICE

a) Have your power tool serviced by a qualified 

repair person using only identical replacement 
parts. This will ensure that the safety of the power 
tool is maintained.

Additional safety rules  

for cordless drills / drivers

▪

Be aware that this tool is always in an operating condi-

tion, because it does not have to be plugged into an 
electrical outlet. Always set the trigger switch to the 

locked OFF position when installing or removing the 

battery pack.

▪

Wear ear protectors when impact drilling

. 

Expo-

sure to noise can cause hearing loss.

▪

Use the auxiliary handle if supplied with the ma-

chine.

Loss of control can cause personal injury.

▪

Hold the power tool by insulated gripping sur-

faces when performing an operation where the 
cutting accessory or the fastener may contact 
hidden wiring. Contact with a “live” wire will make 
exposed metal parts of the power tool “live” and shock 
the operator. 

▪

If possible, always use clamps or a vice to hold your 

work.

▪

Do not touch the bit after operation. It will be very hot.

▪

When using the drill, use safety equipment including 

safety glasses and ear defenders. Wear a dust mask 
if the drilling operation creates dust.

▪

The dust, separated while processing materials, con-

taining quartz (SiO

2

) is dangerous to your health. Do 

not process materials containing asbestos.

▪

The tool must be used only for its prescribed purpose. 

Any use other than those mentioned in this Manual 
will be considered a case of misuse. The user and not 
the manufacturer shall be liable for any damage or in-
jury resulting from such cases of misuse.

▪

To use this tool properly, you must observe the safety 

regulations, the assembly instructions and the oper-

ating instructions to be found in this Manual. All per-
sons who use and service the machine have to be 
acquainted with this Manual and must be informed 
about its potential hazards. Children and frail people 
must not use this tool. Children should be supervised 
at all times if they are in the area in which the tool is 
being used. It is also imperative that you observe the 
accident prevention regulations in force in your area. 
The same applies for general rules of occupational 
health and safety.

▪

The manufacturer shall not be liable for any changes 

made to the tool nor for any damage resulting from 
such changes.

Even when the tool is used as prescribed it is not pos-
sible to eliminate all residual risk factors. The following 
hazards may arise in connection with the tool’s construc-
tion and design:

▪

Damage to the lungs if an effective dust mask is not 

worn.

▪

Damage to hearing if effective ear defenders are not 

worn.

▪

Power tools must not be used outdoors in rainy weath-

er, or in moist environment (after rain) or in close vicin-
ity with easily flammable liquids and gases. The work-
ing place should be well lit.

Know your product

Before using the power tool, familiarize yourself with all 
operating features and safety requirements.
Use the tool and accessories only for the applications 
intended. All other applications are expressly ruled out.
  1.   Keyless chuck
  2.   Torque adjustment collar
  3.   Speed selector switch
  4.   LED battery state indicator

  5.  ON/OFF trigger switch

  6.  Forward/reverse switch

  7.   LED light
  8.   LED battery state indicator button (BUR2 18Li HD)
  9.   Battery*
 10.   Battery release button
 11.   Charger*
 12.   Auxiliary handle (BUR2 18Li HD)

* Accessories shown or described are not part of the 
standard delivery scope.

Operation

The machine is intended for driving in and loosening 
screws as well as for drilling in wood, metal, ceramics 
and plastic.
BUR2 18Li HD machines are additionally intended for 
impact drilling in bricks, brickwork and masonry.

FITTING AND REMOVING THE  
BATTERY PACK

To remove the battery:

 Press release button (10) in the 

indicated direction (A) and pull the battery out of the ma-
chine body. (B)

pages BR2-BUR2-18Li HD-2017.indd   5

9.2.2018 г.   10:26:59