Ryobi ONE+ LLCDI18-LL99X 5133002482 - Инструкция по эксплуатации - Страница 10

5

English

GB

FR

DE

ES

IT

NL

PT

DK

SE

FI

NO

RU

PL

CZ

HU

RO

LV

LT

EE

HR

SI

SK

GR

TR

OPERATION

■

Depress the switch trigger to start the drill.

■

Move the dr ill bit into the w orkpiece, applying only  

enough  pressure  to  keep  the  bit cutting.  Do  not  force 

the drill or apply side pressure to elongate a hole . Let 

the tool do the work.

WARNING

:

Be prepared f or binding at bit breakthrough.  

When these situations occur, drill has a tendency 

to g rab and kic k opposite to the direction of  

rotation and could cause loss of control when  

breaking through mater ial. If not prepared, this  

loss of control can result in possib le ser ious 

injury.

■

When dr illing hard, smooth surf aces, use a center  

punch to mar k the desired hole location.   This will  

prevent the drill bit from slipping off-center as the hole 

is started.

■

When dr illing metals , use a light oil on the dr ill bit to 

keep it from overheating. The oil will prolong the life of 

the bit and increase the drilling action.

■

If  the  bit  jams  in  the  workpiece  or  if  the  drill  stalls, 

stop the tool immediately . Remo ve the bit from the  

workpiece and determine the reason for jamming.

NOTE:

  This dr ill has an electr ic br ake.  When the s witch 

trigger is released, the chuc k stops tur ning.  When the  

brake is functioning proper ly, spar ks will be visib le 

through the vent slots on the housing.  This is nor mal and 

is the action of the brake.

MAINTENANCE

WARNING

When ser vicing, use only identical R YOBI 

replacement par ts. Use of an y other par ts ma y 

create a hazard or cause product damage.

Avoid using solv ents when cleaning plastic par ts. Most  

plastics are susceptib le to damage from v arious types of 

commercial solv ents and ma y be damaged b y their use . 

Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING

Do not at an y time let br ake fluids , gasoline , 

petroleumbased products , penetr ating oils , etc., 

come in contact with plastic par ts. Chemicals can 

damage, w eaken or destro y plastic which ma y 

result in serious personal injury.

Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.

WARNING

Do not attempt to modify this tool or create  

accessories n ot r ecommended f or u se w ith t his 

tool. Any such alteration or modification is misuse 

and could result in a hazardous condition leading 

to possible serious personal injury.

ENVIRONMENTAL PROTECTION

Recycle raw mater ials instead of disposing 

as w aste.  The machine , accessor ies and  

p a c k a g i n g   s h o u l d   b e   s o r

t e d   f o r 

environmental-friendly recycling.

SYMBOLS

    Safety Alert

   V           Volts

  min

-1

Revolutions or reciprocations per minute

Direct current

CE Conformity

     Please read the instructions carefully before  

starting the machine.

Recycle unwanted

   Waste electr ical products should not be  

disposed  of  with  household  waste.  Please 

recycle where f acilities exist. Check with y our 

Local Authority or retailer for recycling advice.