Metabo SBE 760, патрон с зубчатым венцом 600841500 - Инструкция по эксплуатации - Страница 10

ENGLISH

en

9

Original instructions

1. Declaration of Conformity

We declare under our sole responsibility: These 
impact drills, identified by type and serial number 
*1), comply with all relevant requirements of the 
directives *2) and standards *3). Technical file at *4) 
- see page 3.

2. Specified Use

The machine is suitable for drilling, without impact, 
in metal, wood, plastic and similar materials and for 
impact drilling in concrete, stone and similar mate-
rials. It is also suitable for thread tapping and for 
screwdriving (not SB 760).
The user bears sole responsibility for any damage 
caused by improper use.
Generally accepted accident prevention 
regulations and the enclosed safety information 
must be observed.

3. General Safety Instructions

For your own protection and for the 
protection of your electrical tool, pay 
attention to all parts of the text that are 
marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.



WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 
fire and/or serious injury.

Keep all safety instructions and information for 

future reference.



Pass on your electrical tool only together with these 
documents.

4. Special Safety Instructions

Always wear hearing protection when using 

hammer drills.

 Exposure to noise can cause loss 

of hearing.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a “live” wire may make exposed metal 
parts of the power tool “live” and could give the 
operator an electric shock.
Pull the plug out of the plug socket before any 
adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 
switch when the plug is removed from the mains 
socket or in case of a power cut.

Ensure that the spot where you wish to work is 



free of 

power cables, gas lines or water pipes

(e.g. using a metal detector).
Smaller workpieces must be secured such that they 
are not carried along with the drill bit when drilling 
(e.g. by clamping in a vice or on a work bench with 
screw clamps).
Keep hands away from the rotating tool! Remove 
chips and similar material only when the machine is 
not in operation.
Metabo S-automatic safety clutch. When the safety 
clutch responds, switch off the machine 
immediately! If the tool jams or catches, the power 
supply to the motor is restricted. Due to the strong 
force which can arise, always hold the machine with 
both hands using the handles provided, stand 
securely and concentrate.
The Metabo S-automatic safety clutch must not be 
used for torque control.
Caution must be exercised when driving screws into 
hard materials (driving screws with metric or 
imperial threads into steel)! The screw head may 
break, or a high reverse torque may build up on the 
handle.
Dust from material such as paint containing lead, 
some wood species, minerals and metal may be 
harmful. Contact with or inhalation of the dust may 
cause allergic reactions and/or respiratory diseases 
to the operator or bystanders. 



Certain kinds of dust are classified as carcinogenic 
such as oak and beech dust especially in 
conjunction with additives for wood conditioning 
(chromate, wood preservative). Material containing 
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is 

recommended.

Follow national requirements for the materials you 
want to work with.

5. Overview

See page 2.

1 Thumbwheel for gear selection
2 Additional handle
3 Geared  chuck*
4 Keyless chuck *
5 Depth  stop
6 Sliding switch for normal drilling/impact drilling
7 Speed preselection wheel *
8 Rotation selector switch
9 Locking button for continuous activation

10 Trigger switch

* depending on equipment