Metabo SB 18 LTX BL Q I 602361650 - Инструкция по эксплуатации - Страница 13

ENGLISH

en

13

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to 

cause cancer, birth defects or other reproductive 

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and 

other masonry products, and

- Arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well-

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- do not direct the escaping particles and the 

exhaust air stream towards yourself or nearby 

persons or towards dust deposits,

- use an extraction unit and/or air purifiers,

- ensure good ventilation of the workplace and keep 

it clean using a vacuum cleaner. Sweeping or 

blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush protective gear.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws 

related to the carriage of hazardous goods (UN 

3480 and UN 3481). Inform yourself of the currently 

valid specifications when shipping li-ion battery 

packs. If necessary, consult your freight forwarder. 

Certified packaging is available from Metabo. 
Only send the battery pack if the housing is intact 

and no fluid is leaking. Remove the battery pack 

from the machine for sending. Prevent the contacts 

from short-circuiting (e.g. by protecting them with 

adhesive tape).

Illustrations are provided at the beginning of the 

operating instructions.

Symbol explanation:

Movement direction

Drill bit
Slow
Fast
First gear
Second gear
Third gear
Screws
Drills, screws, threaded rods
Impact drilling 
Torque

Fig. A

1 Keyless  chuck

2 Additional handle

3 Slide switch (normal drilling, impact drilling) *

4 Gear  switch

5 Rotation selector switch (rotation setting, 

transport lock) - both sides of the machine

6 Handle

7 Bit  depot  *

8 Belt  hook  *

9 Battery pack release button

10 Capacity indicator button

11 Capacity and signal indicator

12 Battery pack

13 Setting wheel for 

- Pulse function

- Torque control

- max. torque

14 LED lamp (Working light and red warning lamp)

15 Trigger switch

*equipment-specific

7.1 Electronic safety shutdown (...LTX BL...)

In case of sudden rotation of the power tool around 

the drill axis, e.g. due to catching/jamming of the 

accessory, the machine switches off automatically - 

for better control of the machine and high user 

protection compared to machines without this func-

tion.
The shutdown is indicated by a single red flashing of 

the LED light (14) and a single beep.

7.2 Battery pack, capacity and signal 

indicator

Fig. B

Charge the battery pack before use.
Recharge the battery pack if performance dimin-

ishes.

5. Figures

6. Overview

7. Use

Nm