Metabo BE 500/6 600343000 - Инструкция по эксплуатации - Страница 10

ENGLISH

en

9

Original Instructions

We, being solely responsible, hereby declare that 
these drills, identified by type and serial number *1), 
meet all relevant requirements of directives *2) and 
standards *3). Technical documents for *4) - see 
page 3.

The drills are suitable for non-impact drilling in 
metal, wood, plastic and similar materials. 
Furthermore, the machine is suitable for thread 
tapping and screwdriving.
The user bears sole responsibility for any damage 
caused by inappropriate use.
Generally accepted accident prevention 
regulations and the enclosed safety information 
must be observed.

For your own protection and for the 
protection of your power tool, pay 
attention to all parts of the text that are 
marked with this symbol!

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 
shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 
documents.

Use the side handle(s), supplied with the tool.

Loss of control can cause personal injury.

Mains powered machines: hold the power tool 

by the insulated gripping surfaces when 

performing an operation during which the 

cutting accessory may come into contact with 

hidden wiring or its own cord.

 A cutting 

accessory contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock.

Cordless machines: hold the power tool by the 

insulated gripping surfaces, when performing 

an operation during which the cutting 

accessory may contact hidden wiring.

 A cutting 

accessory contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock.
Ensure that the place where you wish to work is free 
of 

power cables, gas lines or water pipes

 (e.g. 

check using a metal detector).

Smaller workpieces must be secured in such a way 
that they are not carried along with the tool (e.g. by 
clamping in a vice or on a work bench with screw 
clamps).
Keep hands away from the rotating tool! Remove 
chips and similar material only with the machine at 
a standstill.
High forces are released if the tool jams or catches. 
Always hold the machine with both hands by the 
intended handles, take a secure stance and 
concentrate on the work.
Caution must be exercised when driving screws into 
hard materials (driving screws with metric or 
imperial threads into steel)! The screw head may 
break or a high reverse torque may build up on the 
handle.

Reducing dust exposure:

Some of the dust created using this power tool 
may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 
defects or other reproductive harm. Some 
examples of these substances are: lead (from lead-
based paints), crystalline silica (from bricks cement, 
etc.), additives for wood treatment (chromate, wood 
preservative), some types of wood (like oak and 
beech dust), metals, asbestos.
The risk from exposure to such substances will 
depend on how long the user or nearby persons are 
being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a 
well ventilated area and wear protective equipment, 
such as dust masks that are specially designed to 
filter out microscopic particles.
Observe the relevant guidelines for your material, 
staff, application and place of application (e.g. 
occupational health and safety regulations, 
disposal).
Collect the generated particles at the source, avoid 
deposits in the surrounding area. 
Use suitable accessories for special work. In this 
way, fewer particles enter the environment in an 
uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 
or on dust deposits.

- Use an extraction unit and/or air purifiers.
- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 
or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

4.1

Special safety instructions for mains 

powered machines:

Avoid inadvertent starts by always unlocking the 
switch when the plug is removed from the mains 
socket or whenever the power fails.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions