Шуруповерты FESTOOL PDC 18/4 Li 5.2-Plus-SCA 574918 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
PDC 18/4 Li
13
GB
9
Working with the machine
9.1
On/Off switch [1-4]
Press = ON, release = OFF
L
The speed of the machine depends on how far
the on/off switch is pressed in.
9.2
Bit store [1-3]
Magnetic, for storing bits and bit holders.
9.3
Belt clip [1-10]
The belt clip (right/left) allows the user to attach
the machine briefly to work clothing.
9.4
Attaching the additional handle[3]
Always use the additional handle.
X
Position the additional handle
[3-2]
on the ex-
tension of the gearbox housing and engage the
recesses on the additional handle in the lugs on
the housing.
X
Turn the handle until secured in position.
L
Turn the handle to adjust the position in 30° in-
crements.
L
The drilling depth can be adjusted using the
depth stop
[3-1]
.
9.5
Acoustic warning signal
Acoustic warning signals sound and the machine
switches off in the following operating states:
10
Service and maintenance
Customer service and repair
only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
Only use original Festool spare parts!
Order No. at: www.festool.com/service
Note the following information:
– Keep the ventilation slits on the machine free and
clean to ensure adequate cooling.
– Keep the contacts on the machine, charger and
battery pack clean.
For service, maintenance, disposal and
transport of the battery pack, note enclosed
instructions of the battery pack!
11
Environment
Do not dispose of the device in house-
hold waste!
Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only:
In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
WARNING
Risk of injury
X
Always secure the workpiece in such a manner
that it cannot move while being machined.
– Preset torque reached.
– "Block protect", starting torque too high.
– Machine overloaded
WARNING
Risk of injury, electric shock
X
Always disconnect the battery pack from the
machine before any cleaning or maintenance!
X
All maintenance and repair work which requires
the motor housing to be opened, must only be
carried out by an authorised service workshop.
EKAT
1
2
3
5
4
