Шуруповерты FESTOOL PDC 18/4 Li 5.2-Plus-SCA 574918 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
PDC 18/4 Li
GB
Original operating manual
1
Symbols
2
Safety instructions
2.1
General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2
Machine-specific safety notices for cordless
drills
–
Wear ear protection when impact drilling.
Expo-
sure to noise can result in loss of hearing.
–
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
–
Hold power tool by insulated gripping surfaces,
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring.
Cutting accessory or fasteners contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
–
Use suitable detectors to determine if utility
lines are hidden in the work area or call the lo-
cal utility company for assistance.
Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage or
may cause an electric shock.
–
Wear suitable protection:
such as ear protec-
tion, safety goggles, a dust mask for work which
generates dust, and protective gloves when
working with raw materials and when changing
tools.
CAUTION! Power tool can block and cause
sudden kickback!
Switch off immediately!
–
Hold the power tool firmly in your hand. Adjust
the torque correctly for screwing. Be prepared
for a high reaction torque,
which may cause the
power tool to turn and possibly lead to injury.
–
Do not use the power tool in the rain or in damp
surroundings.
Moisture in the power tool may
cause a short circuit and burning.
– Do not lock the on/off switch permanently!
2.3
Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of as domestic waste.
Tip or advice
Handling instruction
Drilling
Sound pressure level
L
PA
= 73 dB(A)
Noise level
L
WA
= 84 dB(A)
Uncertainty
K = 3 dB
Impact drilling
Sound pressure level
L
PA
= 104 dB(A)
Noise level
L
WA
= 115 dB(A)
Uncertainty
K = 3 dB
CAUTION
When working with noise
Damage to hearing
X
Always use ear protection.
