Шуруповерты FESTOOL MX 1602 E FF HS3R 768009 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
Original
operating
manual
GB
1 Technical
Specifi cations
Stirrer
MX 1200/2 E EF
MX 1600/2 E EF
Voltage
220 – 240 V
220 – 240 V
Frequency
50 / 60 Hz
50 / 60 Hz
Connected load
1200 W
1500 W
Idling speed
1st
speed
150 – 360 rpm
150 – 300 rpm
2nd
speed
320 – 780 rpm
320 – 650 rpm
Electronic speed preselection
•
•
Temperature-dependent overload protection
•
•
2-speed switch
•
•
Tool adapter
M14x2/ErgoFix
Stirrer – max
140 mm
160 mm
Collar –
57 mm
57 mm
Weight
6.2 kg
6.4 kg
Protection rating
II /
II /
2 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Read the operating instructions/notes!
Wear a dust mask!
Wear ear protection!
Wear protective gloves!
Do not throw in the household waste!
Advice or tip
3 Operating
equipmen
t
[1-1]
Left
handle
[1-2]
Locking
button
[1-3]
Ventilation
opening
[1-4]
Speed
control
[1-5]
Right
handle
[1-6]
Speed selector switch
[1-7]
Casing
[1-8]
ErgoFix adapter
[1-9]
Collar
[1-10]
Switch with switch protection
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
4 Intended
use
The device is designed for mixing powdered mate-
rials, such as mortar, plaster, adhesives and non-
solvent paints, varnishes and similar substances.
The manufacturer accepts no liability for possible
damage or accidents caused by using or operating
the device inappropriately or incorrectly.
5 Safety
instructions
WARNING!
All applicable legal requirements concerning oc-
cupational safety must be adhered to, along with
the safety instructions that are cited in the section
“Safety instructions” and all other generally ap-
plicable health and working principles. The manu-
facturer accepts no liability for any damage that is
caused by unauthorised changes to the machine.
