FERM FX Power CDM1164 - Инструкция по эксплуатации - Страница 7

7

EN

b)

   Children being supervised not to play with 

the appliance

c)   Do not recharging non-rechargeable batteries!
d)   During charging, batteries must be placed in 

the well ventilated area!

Residual risks

Even when the power tool is used as 
prescribed it is not possible to eliminate all 
residual risk factors. The following hazards 
may arise in connection with the power tool’s 
construction and design:

a)   Health defects resulting from vibration 

emission if the power tool is being used 
over longer period of time or not adequately 
managed and properly maintained.

b)   Injuries and damage to property to due to 

broken accessories that are suddenly dashed.

Warning!

 This power tool produces an 

electromagnetic field during operation. 
This field may under some 
circumstances interfere with active or 
passive medical implants. To reduce the 
risk of serious or fatal injury, we 
recommend persons with medical 
implants to consult their physician and 
the medical implant manufacturer before 
operating this power tool.

2.  MACHINE INFORMATION

Intended use

This cordless drill is intended for driving in and 
loosening screws as well as for drilling in wood, 
metal and plastic.

Technical specifications

Model No 

CDM1164

Voltage 20V 

Chuck capacity 

0.8 - 10mm

Torque settings 

17 + Drill mode

No load speed 

  Position 1: 

0-350 /min

  Position 2: 

0-1300 /min

Weight 

0.8 kg

Sound pressure level L

PA 

70.3 dB(A), K=5dB(A)

Sound power level L

WA 

81.3 dB(A), K=5dB(A)

Vibration 

2.368 m/s

2

 k=1.5m/s

2

Model No 

CDA1167

Battery Type 

Lithium-Ion

Voltage 20V 

Capacity 

2.0 Ah

Recommended charger 

CDA1169, CDA1170

Weight 

0.3 kg 

Model No 

CDA1169

Charger input 

100-240V~ 50/60Hz Max 1A

Charger output 

21.5 

 1.7A

Rechargeable battery pack  

20V Li-ion 1.5Ah

Charging time 2.0Ah battery 

90 minutes

Charging time 4.0Ah battery 

120 minutes

Recomended batteries  

CDA1167, CDA1168

Weigth 

0.15 kg

Only use the following batteries of the FX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1167   20V, 2Ah Lithium-Ion (Included)
CDA1168   20V, 4Ah Lithium-Ion 

The following charger of the can be used to
charge these batteries.
CDA1169   Charger adapter (Included)
CDA1170   Quick charger 

The batteries of the FX-POWER 20V battery
platform are interchangeable with all the FERM
FX-POWER battery platform tools.

Vibration level

The vibration emission level stated in this 
instruction manual has been measured in 
accordance with a standardized test given in 
EN 62841; it may be used to compare one tool 
with another and as a preliminary assessment of 
exposure to vibration when using the tool for the 
applications mentioned.
•   Using the tool for different applications, or with 

different or poorly maintained accessories, 
may significantly increase the exposure level.

•   The times when the tool is switched off or when 

it is running but not actually doing the job, may 
significantly reduce the exposure level.

Protect yourself against the effects of vibration by 
maintaining the tool and its accessories, keeping 
your hands warm, and organizing your work 
patterns.