DEWALT DWD 014 S - Инструкция по эксплуатации - Страница 29

E N G L I S H

27

drilling metals. The exceptions are cast iron and 
brass which should be drilled dry. 

NOTE:

 Large [5/16" (8 mm) to 1/2" (13 mm)] holes 

in steel can be made easier if a pilot hole [5/32" 
(4 mm) to 3/16" (5 mm)] is drilled first.

DRILLING IN WOOD

Start drilling with slow speed and increase to full 
power while applying firm pressure on the tool. 
Holes in wood can be made with the same twist 
drills used for metal. These bits may overheat unless 
pulled out frequently to clear chips from the flutes. 
Work that is apt to splinter should be backed up 
with a block of wood.  

MAINTENANCE

Your D

E

WALT power tool has been designed to 

operate over a long period of time with a minimum 
of maintenance. Continuous satisfactory operation 
depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of 
injury, turn unit off and disconnect 
machine from power source before 
installing and removing accessories, 
before adjusting or changing set-
ups or when making repairs.

 Be sure 

the trigger switch is in the OFF position. 
An accidental start-up can cause injury.

Motor Brushes

D

E

WALT uses an advanced brush system which 

automatically stops the drill when the brushes wear 
out. This prevents serious damage to the motor. 
New brush assemblies are available at authorized 
D

E

WALT service centers. Always use identical 

replacement parts.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING:

 Blow dirt and dust out of 

the main housing with dry air as often as 
dirt is seen collecting in and around the 
air vents. Wear approved eye protection 
and approved dust mask when 
performing this procedure. 

WARNING: 

Never use solvents or 

other harsh chemicals for cleaning the 
non-metallic parts of the tool. These 
chemicals may weaken the materials 
used in these parts. Use a cloth 
dampened only with water and mild 
soap. Never let any liquid get inside the 
tool; never immerse any part of the tool 
into a liquid.

Optional Accessories

WARNING:

 Since accessories, other 

than those offered by D

E

WALT, have 

not been tested with this product, use 
of such accessories with this tool could 
be hazardous. To reduce the risk of 
injury, only D

E

WALT, recommended 

accessories should be used with this 
product.

  CAUTION:

 To reduce the risk of injury, 

accessories should be used only in 
sizes up to the maximums shown in the 
Technical Data.

Consult your dealer for further information on the 
appropriate accessories.

Protecting the Environment

 Separate collection. This product must 
not be disposed of with normal 
household waste.

Should you find one day that your D

E

WALT product 

needs replacement, or if it is of no further use to you, 
do not dispose of it with household waste. Make this 
product available for separate collection.

   Separate collection of used products 

and packaging allows materials to be 
recycled and used again. Re-use of 
recycled materials helps prevent 
environmental pollution and reduces 
the demand for raw materials. 

Local regulations may provide for separate collection 
of electrical products from the household, at 
municipal waste sites or by the retailer when you 
purchase a new product. 

D

E

WALT provides a facility for the collection and 

recycling of D

E

WALT products once they have 

reached the end of their working life. To take 
advantage of this service please return your product 
to any authorised repair agent who will collect them 
on our behalf.