DEWALT 12 В XR DCD701N-XJ - Инструкция по эксплуатации - Страница 6

6

ENGLISH

GENERAL POWER TOOL SAFET Y WARNINGS

WARNING: Read all safety warnings, instructions, 
illustrations and specifications provided with this 
power tool.

 Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS 

FOR FUTURE REFERENCE.

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

1)  Work Area Safety

a ) 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b ) 

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks which 

may ignite the dust or fumes.

c ) 

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose control.

2) Electrical Safety

a ) 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk of 
electric shock.

b ) 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric shock if 

your body is earthed or grounded.

c ) 

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 
electric shock.

d ) 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. Keep 
cord away from heat, oil, sharp edges or moving 
parts. 

Damaged or entangled cords increase the risk of 

electric shock.

e ) 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use. 

Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

f ) 

If operating a power tool in a damp location is 
unavoidable, use a residual current device (RCD) 
protected supply. 

Use of an RCD reduces the risk of 

electric shock.

Batteries

Chargers/Charge Times (Minutes)

Cat #

V

DC

Ah

Weight

kg

DCB104

DCB107

DCB112

DCB113

DCB115

DCB118

DCB132

DCB119

DCB122

12

2.0

0.22

30

90

60

50

30

X

30

60

DCB124

12

3.0

0.25

45

140

90

70

45

45

45

90

DCB125

12

1.3

0.20

22

60

40

30

22

X

22

40

DCB127

12

2.0

0.20

30

90

60

50

30

X

30

60

3) Personal Safety

a ) 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do not 
use a power tool while you are tired or under the 
influence of drugs, alcohol or medication.

A moment 

of inattention while operating power tools may result in 
serious personal injury.

b ) 

Use personal protective equipment. Always wear eye 
protection. 

Protective equipment such as a dust mask, 

non-skid safety shoes, hard hat or hearing protection used 
for appropriate conditions will reduce personal injuries.

c ) 

Prevent unintentional starting. Ensure the switch 
is in the off-position before connecting to power 
source and/or battery pack, picking up or carrying 
the tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 
invites accidents.

d ) 

Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached 

to a rotating part of the power tool may result in 
personal injury.

e ) 

Do not overreach. Keep proper footing and balance 
at all times. 

This enables better control of the power tool 

in unexpected situations.

f ) 

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away from 
moving parts.

 Loose clothes, jewellery or long hair can be 

caught in moving parts.

g ) 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used. 

Use of dust collection can 

reduce dust-related hazards.

h ) 

Do not let familiarity gained from frequent use of 
tools allow you to become complacent and ignore 
tool safety principles.

 A careless action can cause severe 

injury within a fraction of a second.

4)  Power Tool Use and Care

a ) 

Do not force the power tool. Use the correct power 
tool for your application. 

The correct power tool 

will do the job better and safer at the rate for which it 
was designed.

b ) 

Do not use the power tool if the switch does not turn 
it on and off. 

Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c ) 

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from 
the power tool before making any adjustments,