DEWALT 12 В XR DCD701N-XJ - Инструкция по эксплуатации - Страница 5

ENGLISH

5

and the accessories, keep the hands warm, organisation of 
work patterns.

EC-Declaration of Conformity

Machinery Directive

Sub-Compact Drill/Driver
DCD701

D

E

WALT    declares that these products described under 

Technical 

Data

 are in compliance with: 

2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010.

These products also comply with Directive 2014/30/EU and 
2011/65/EU. For more information, please contact D

E

WALT    at 

the following address or refer to the back of the manual.

The undersigned is responsible for compilation of the technical 
file and makes this declaration on behalf of D

E

WALT   .

Markus Rompel
Vice-President Engineering, PTE-Europa
D

E

WALT   ,  Richard-Klinger-Straße  11,

D-65510, Idstein, Germany
06.12.2018

WARNING:

 To reduce the risk of injury, read the 

instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each 
signal word. Please read the manual and pay attention to 
these symbols.

DANGER: 

Indicates an imminently hazardous 

situation which, if not avoided, 

will

 result in 

death or 

serious injury

.

WARNING:

 Indicates a potentially hazardous situation 

which, if not avoided, 

could

 result in 

death or 

serious injury

.

CAUTION:

 Indicates a potentially hazardous situation 

which, if not avoided, 

may

 result in 

minor or 

moderate injury

.

NOTICE: 

Indicates a practice 

not related to 

personal injury

 which, if not avoided, 

may

 result in 

property damage

.

Denotes risk of electric shock.

Denotes risk of fire.

Congratulations!

You have chosen a D

E

WALT    tool. Years of experience, thorough 

product development and innovation make D

E

WALT     one  of  the 

most reliable partners for professional power tool users.

Technical Data

DCD701

Voltage

V

DC

12

Type

1

Battery type

Li-Ion

Power output

W

250

No-load speed
 1st 

gear

 2nd 

gear

min

-1

min

-1

0–425

0–1500

Max. Torque (hard/soft)

Nm

57.5/25.5

Chuck capacity

mm

10

Maximum

drilling

capacity

 Wood
 Metal

mm
mm

20
10

Weight (without battery pack)

kg

0.87

Noise values and vibration values (triax vector sum) according to EN62841-2-1:

L

PA

    (emission sound pressure level)

dB(A)

72

L

WA

    (sound  power  level)

dB(A)

83

K   (uncertainty for the given sound level)

dB(A)

3

Drilling into metal

Vibration emission value a

h,D

 =

m/s

2

2.5

Uncertainty K =

m/s

2

1.5

Screwdriving

Vibration emission value a

h

 =

m/s

2

< 2.5

Uncertainty K =

m/s

2

1.5

The vibration emission level given in this information sheet has 
been measured in accordance with a standardised test given in 
EN62841 and may be used to compare one tool with another. It 
may be used for a preliminary assessment of exposure.

WARNING:

 The declared vibration emission level 

represents the main applications of the tool. However if 
the tool is used for different applications, with different 
accessories or poorly maintained, the vibration emission 
may differ. This may significantly increase the exposure 
level over the total working period.

An estimation of the level of exposure to vibration should 
also take into account the times when the tool is switched 
off or when it is running but not actually doing the job. 
This may significantly reduce the exposure level over the 
total working period.

Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool 

SUBCOMPACT DRILL/DRIVER
DCD701