Crown CT10120 - Инструкция по эксплуатации - Страница 19

19

English

to be performed. 

Use of the power tool for operations 

different from those intended could result in a hazard-

ous situation�

•

Keep  handles  and  grasping  surfaces  dry,  clean 

and  free  from  oil  and  grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 

control of the tool in unexpected situations�

•

Note that when you operate a power tool, please 

hold the auxiliary handle correctly, which is helpful 

when controlling the power tool� Therefore, proper 

holding can reduce the risk of accidents or injuries�

Service

•

Have  your  power  tool  serviced  by  a  qualified 

repair  person  using  only  identical  replacement 

parts.

 This will ensure that the safety of the power tool 

is maintained�

•

Follow instruction for lubricating and changing ac-

cessories�

Special safety warnings

•

Wear ear protectors when impact drilling.

 Expo-

sure to noise can cause hearing loss�

NOTE: 

The above warning applies only to impact drills 

and may be omitted for drills other than impact drills�

•

Use auxiliary handle(s), if supplied with the tool. 

Loss of control can cause personal injury�

•

Hold power tool by insulated gripping surfaces, 

when  performing  an  operation  where  the  cutting 

accessory  may  contact  hidden  wiring  or  its  own 

cord.

 Cutting accessory contacting a "live" wire may 

make exposed metal parts of the power tool "live" and 

could give the operator an electric shock�

Safety  guidelines  during  power  tool  op

-

eration

•

The workpiece shall be fastened� Fixed devices or 

vice shall be used to fasten the workpiece, which will 

be more secure than holding the workpiece with your 

hands�

•

Considering that asbestos may cause cancer, as-

bestos-containing materials shall not be processed�

•

The power tool could be put down only after the 

parts of power tool is completely static� Accessory on 

the power tool might be clamped during work, which 

may make it difficult for you to control the power tool.

•

Power tool with damaged electric wires shall not be 

used� If electric wires of the power supply are damaged 

during the work, you shall not touch the damaged elec-

tric wires and shall pull out the plug immediately� Dam-

aged electric wires will raise the risk of electric shock�

•

When using power tools outdoor, you must install 

fault current (FI) protection switch on the power tool�

•

Appropriate detector shall be used to find the loca

-

tion of hidden power wires� Or you should obtain rel-

evant information from local power supply unit� Drilling 

electric  wires  will  cause  fire  and  electric  shock.  Dam

-

aged gas pipe will cause exploration� If water pipes are 

punctured, damage will be caused to property�

•

In case a accessory installed on the power tool is 

clamped, you shall shut down the power tool and stay 

calm� At that time, the power tool will produce extremely 

high reactive torque thus resulting in return stroke� The 

accessory installed on the power tool are likely to be 

clamped, for example: hypercharge of power tool or skew-

ing of accessory installed on the power tool during work�

•

If hidden electric wires or power lines of the power 

tool itself might be cut off during work, you must hold 

the insulated handle to operate the power tool� When 

the power tool is in touch with a charged line, the metal 

parts on the power tool will conduct electricity and may 

cause the operator to get an electric shock�

•

During work, you must tightly hold the power tool 

and ensure you stand firmly. You should hold the pow

-

er tool with your hands�

•

When operating and using the power tool, you can 

only hold switch position of the main handle rather than 

other parts�

•

Avoid stopping an power tool motor when loaded�

•

Never remove any chips or fragments with your 

power tool's motor running�

•

When working, follow the position of the power sup-

ply cable� Avoid winding it around your legs or arms� 

•

Use only sharp drill bits without defects - it will make 

working with the power tool easier�

•

The modification of the drill bits design and the use 

of  removable  orifices  and  accessories  not  envisaged 

for this power tool is strictly forbidden� 

•

Do not apply excessive pressure when operating the 

power tool - it can jam the drill bit and overload the 

engine�

•

Do not allow drill bits to jam in the material pro-

cessed� If this occurs, do not try to release them by 

means of the power tool engine� This can put the pow-

er tool out of order�

•

Striking out drill bits jammed in the material pro-

cessed with a hammer or other objects is strictly for-

bidden - metal fragments can hurt both the operator 

and the people nearby�

•

Avoid overheating your power tool, when using it for 

a long time�

Symbols used in the manual

Following symbols are used in the operation manual, 

please remember their meanings� Correct interpreta-

tion of the symbols will allow correct and safe use of 

the power tool�

Symbol

Meaning

Impact drill

Sections marked gray - soft 

grip (with insulated surface)�

Serial number sticker:

CT ��� - model;

XX - date of manufacture;

XXXXXXX - serial number�