CROWN CT10113 - Инструкция по эксплуатации - Страница 17

17

English

Service

•

Have  your  power  tool  serviced  by  a  qualified 

repair  person  using  only  identical  replacement 

parts.

 This will ensure that the safety of the power tool 

is maintained�

•

Follow instruction for lubricating and changing ac-

cessories�

Special safety warnings

•

Use auxiliary handle(s), if supplied with the tool. 

Loss of control can cause personal injury�

•

Hold  power  tool  by  insulated  gripping  sur-

faces,  when  performing  an  operation  where  the 

cutting  accessory  may  contact  hidden  wiring  or 

its  own  cord.

 Cutting accessory contacting a "live" 

wire may make exposed metal parts of the power 
tool "live" and could give the operator an electric 

shock�

Safety  guidelines  during  power  tool 

operation

•

The workpiece shall be fastened� Fixed devices or 

vice shall be used to fasten the workpiece, which will 
be more secure than holding the workpiece with your 
hands�

•

Considering that asbestos may cause cancer, as-

bestos-containing materials shall not be processed�

•

The power tool could be put down only after the 

parts of power tool is completely static� Accessory on 
the power tool might be clamped during work, which 

may make it difficult for you to control the power tool.

•

Power tool with damaged electric wires shall not be 

used� If electric wires of the power supply are dam-
aged during the work, you shall not touch the damaged 
electric wires and shall pull out the plug immediately� 
Damaged electric wires will raise the risk of electric 
shock�

•

When using power tools outdoor, you must install 

fault current (FI) protection switch on the power tool�

•

Appropriate detector shall be used to find the loca

-

tion of hidden power wires� Or you should obtain rel-
evant information from local power supply unit� Drilling 

electric  wires  will  cause  fire  and  electric  shock.  Dam

-

aged gas pipe will cause exploration� If water pipes are 
punctured, damage will be caused to property�

•

In case a accessory installed on the power tool is 

clamped, you shall shut down the power tool and stay 
calm� At that time, the power tool will produce extreme-
ly high reactive torque thus resulting in return stroke� 
The accessory installed on the power tool are likely to 
be clamped, for example: hypercharge of power tool or 
skewing of accessory installed on the power tool dur-
ing work�

•

If hidden electric wires or power lines of the power 

tool itself might be cut off during work, you must hold 
the insulated handle to operate the power tool� When 
the power tool is in touch with a charged line, the metal 
parts on the power tool will conduct electricity and may 
cause the operator to get an electric shock�

•

During work, you must tightly hold the power tool 

and ensure you stand firmly. You should hold the pow

-

er tool with your hands�

•

When operating and using the power tool, you can 

only hold switch position of the main handle rather than 
other parts�

•

Avoid stopping an power tool motor when loaded�

•

Never remove any chips or fragments with your 

power tool’s motor running�

•

When working, follow the position of the power sup-

ply cable� Avoid winding it around your legs or arms� 

•

Use only sharp drill bits without defects - it will make 

working with the power tool easier�

•

The modification of the drill bits design and the use 

of  removable  orifices  and  accessories  not  envisaged 

for this power tool is strictly forbidden� 

•

Do not apply excessive pressure when operating the 

power tool - it can jam the drill bit and overload the 
engine�

•

Do not allow drill bits to jam in the material pro-

cessed� If this occurs, do not try to release them by 
means of the power tool engine� This can put the pow-
er tool out of order�

•

Striking out drill bits jammed in the material pro-

cessed with a hammer or other objects is strictly for-
bidden - metal fragments can hurt both the operator 
and the people nearby�

•

Avoid overheating your power tool, when using it for 

a long time�

Symbols used in the manual

Following symbols are used in the operation manual, 
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of 
the power tool�

Symbol

Meaning

Drill

Sections marked gray - soft 
grip (with insulated surface)�

Serial number sticker:

CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�

Read all safety regulations 
and instructions�

Wear safety goggles�

Wear a dust mask�