Bosch GSB 19-2 RE (БЗП) 060117B500 - Инструкция по эксплуатации - Страница 16

16

 | Français

stand the forces this may create and adopt a position
with stable footing.

u

Switch the power tool off immediately and remove the
application tool if the power tool becomes blocked.
Switching on when the drilling tool is blocked may
cause high torque reactions.

Adjusting the Speed/Impact Rate

You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch 

(6)

 to varying ex-

tents.
Applying light pressure to the on/off switch 

(6)

 results in a

low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.

Preselecting the speed/impact rate

You can preselect the required speed/impact rate using the
speed preselection thumbwheel 

(5)

, even during operation.

The required speed/impact rate is dependent on the mater-
ial and the work conditions and can be determined by prac-
tical trials.

Practical Advice

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

Only apply the power tool to the screw/nut when the
tool is switched off.

 Rotating tool inserts can slip off.

After working at a low speed for an extended period, you
should operate the power tool at the maximum speed for ap-
proximately three minutes without load to cool it down.
To drill into tiles, set the selector switch 

(2)

 to the "drilling"

symbol. After drilling through the tile, set the selector switch
to the "impact drilling" symbol and drill with impact.
Use carbide drill bits when working with concrete, stone and
masonry.
When drilling into metal, only use sharpened HSS drills (HSS
= high-speed steel) which are in perfect condition. The

Bosch

 accessory range guarantees appropriate quality.

Using the drill bit sharpener (accessory), you can effortlessly
sharpen twist drill bits with a diameter of 2.5–10 mm.

Maintenance and Service

Maintenance and Cleaning

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by 

Bosch

 or by an

after-sales service centre that is authorised to repair 

Bosch

power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Disposal

The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.

Do not dispose of power tools along with
household waste.

Only for EU countries:

According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.

Only for United Kingdom:

According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.

Français

Consignes de sécurité

Avertissements de sécurité généraux pour l’outil
électrique

AVERTISSE-

MENT

Lire tous les avertissements de sé-
curité, les instructions, les illustra-
tions et les spécifications fournis

avec cet outil électrique.

 Ne pas suivre les instructions

1 609 92A 6RA | (16.09.2021)

Bosch Power Tools