Bosch GSB 18V-85 C 0.601.9G0.302 - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

1 609 92A 2SK | (26.7.16)



Hold the machine with a firm grip. 

High reaction torque 

can briefly occur while driving in and loosening screws.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.



The battery is supplied partially charged. To ensure full 
battery capacity, completely charge the battery in the 
battery charger before using for the first time.



Read the operating instructions of the battery charger.



Read the operating instructions of the 

Bluetooth

®

 Low 

Energy Module GCY 30-4. 



Adjust the gear switch only when the machine is at a 
complete stop.



Always push the gear selector and turn the operating 
mode selector switch through to the stop. 

Otherwise, 

the machine can become damaged.



Before any work on the machine (e. g., maintenance, 
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre 
position. 

Unintentional actuation of the On/Off switch can 

lead to injuries.



Caution! When using the power tool with 

Bluetooth

®

, 

interference can occur with other devices and equip-
ment, aircraft and medical devices (e. g. pacemakers, 
hearing aids). Also, damage to people and animals in 
the immediate vicinity cannot be completely excluded. 
Do not use the power tool with 

Bluetooth

®

 near medical 

devices, petrol stations, chemical plants, in areas 
where there is a danger of explosion and where blast-
ing takes place. Do not use the power tool with 

Blue-

tooth

®

 in aircraft. Avoid using the product near your 

body for extended periods. 

The 

Bluetooth

®

 word mark and logos are registered trade-

marks owned by Bluetooth SIG, Inc. and any use of such 
marks by Robert Bosch Power Tools GmbH is under li-
cence.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for driving in and loosening screws 
as well as for drilling in wood, metal, ceramics and plastic. 
GSB machines are additionally intended for impact drilling in 
bricks, brickwork and masonry.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

With the 

Bluetooth

®

 Low Energy Module GCY 30-4 inserted, 

data and settings of the power tool can be transferred be-
tween the power tool and a mobile terminal device by means 
of 

Bluetooth

®

 wireless technology.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Tool holder

2

Keyless chuck

3

Depth stop

4

Auxiliary handle (insulated gripping surface)

5

Intermediate piece of auxiliary handle

6

Wing bolt for depth stop adjustment

7

Torque presetting ring

8

Mode selector switch

9

Gear selector

10

Belt clip

11

Battery pack

12

Battery unlocking button

13

Worklight

14

Overload protector indicator

15

Universal bit holder *

16

Rotational direction switch

17

On/Off switch

18

Handle (insulated gripping surface)

19

Cover for 

Bluetooth

®

 Low Energy Module GCY 30-4

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

OBJ_BUCH-2883-001.book  Page 15  Tuesday, July 26, 2016  3:35 PM