Bosch GSB 18 VE-2 0.601.994.F20 - Инструкция по эксплуатации - Страница 22

 English | 

21

Bosch Power Tools

2 609 932 649 | (17.8.09)

Noise/Vibration Information

Measured values determined according to 
EN 60745.

GSR 12 VE-2 / GSR 14,4 VE-2 / GSR 18 VE-2:

Typically the A-weighted sound pressure level of 
the product is 72 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed 
80 dB(A).

Wear hearing protection!

Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value 
a

h

= 2.5 m/s

2

, Uncertainty K = 1.5 m/s

2

,

Screwdriving: Vibration emission value 
a

h

= 2.5 m/s

2

, Uncertainty K = 1.5 m/s

2

.

GSB 12 VE-2 / GSB 14,4 VE-2 / GSB 18 VE-2:

Typically the A-weighted noise levels of the 
product are: Sound pressure level 90 dB(A); 
Sound power level 101 dB(A). Uncertainty 
K = 3 dB.

Wear hearing protection!

Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value 
a

h

= 3.5 m/s

2

, Uncertainty K = 1.5 m/s

2

,

Impact drilling into concrete: Vibration emission 
value a

h

= 13 m/s

2

, Uncertainty K = 1.5 m/s

2

,

Screwdriving without impact: Vibration emis-
sion value a

h

= 2.5 m/s

2

, Uncertainty 

K = 1.5 m/s

2

.

GSR 12 VE-2 / GSR 14,4 VE-2 / GSR 18 VE-2 /
GSB 12 VE-2 / GSB 14,4 VE-2 / GSB 18 VE-2:

The vibration emission level given in this infor-
mation sheet has been measured in accordance 
with a standardised test given in EN 60745 and 
may be used to compare one tool with another. 
It may be used for a preliminary assessment of 
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However 
if the tool is used for different applications, with 
different accessories or poorly maintained, the 
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total 
working period.

An estimation of the level of exposure to vibra-
tion should also take into account the times 
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect 
the operator from the effects of vibration such 
as: maintain the tool and the accessories, keep 
the hands warm, organisation of work patterns. 

Declaration of Conformity

We declare under our sole responsibility that 
the product described under “Technical Data” is 
in conformity with the following standards or 
standardization documents: EN 60745 accord-
ing to the provisions of the directives 
2004/108/EC, 98/37/EC (until 28 Dec 2009), 
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC, 
D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

20.07.2009

Assembly

Battery Charging

A battery that is new or has not been used for a 
longer period does not develop its full capacity 
until after approx. 5 charging/discharging cy-
cles. 
To remove the battery 

7

 press the unlocking but-

tons 

6

 and pull out the battery downwards. 

Do 

not exert any force.

Dr. Egbert Schneider
Senior Vice President
Engineering

Dr. Eckerhard Strötgen
Head of Product
Certification

OBJ_BUCH-199-004.book  Page 21  Monday, August 17, 2009  8:32 AM