Bosch GSB 18 VE-2 0.601.994.F20 - Инструкция по эксплуатации - Страница 20

 English | 

19

Bosch Power Tools

2 609 932 649 | (17.8.09)

GSR 12 VE-2 / GSR 14,4 VE-2 /
GSR 18 VE-2 / GSB 12 VE-2 /
GSB 14,4 VE-2 / GSB 18 VE-2:

f

Hold power tool by insulated gripping sur-
faces, when performing an operation where 
the cutting accessory or fastener may con-
tact hidden wiring. 

Cutting accessory and 

fasteners contacting a “live” wire may make 
exposed metal parts of the power tool “live” 
and could give the operator an electric shock.

f

Use appropriate detectors to determine if 
utility lines are hidden in the work area or 
call the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

f

Switch off the power tool immediately 
when the tool insert jams. Be prepared for 
high reaction torque that can cause kick-
back. 

The tool insert jams when:

— the power tool is subject to overload or
— it becomes wedged in the workpiece.

f

Hold the machine with a firm grip. 

High re-

action torque can briefly occur while driving 
in and loosening screws.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held 
more secure than by hand.

f

Keep your workplace clean. 

Blends of mate-

rials are particularly dangerous. Dust from 
light alloys can burn or explode.

f

Always wait until the machine has come to 
a complete stop before placing it down. 

The 

tool insert can jam and lead to loss of control 
over the power tool.

f

Do not open the battery. 

Danger of short-

circuiting.

Protect the battery against heat, e. g., 
also against continuous sun irradiation 
and fire. 

There is danger of explosion.

f

Use only original Bosch batteries with the 
voltage listed on the nameplate of your pow-
er tool. 

When using other batteries, e. g. imi-

tations, reconditioned batteries or other 
brands, there is danger of injury as well as 
property damage through exploding batteries.

Functional Description

Read all safety warnings and all in-
structions. 

Failure to follow the 

warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

While reading the operating instructions, unfold 
the graphics page for the machine and leave it 
open.

Intended Use

GSR 12 VE-2 / GSR 14,4 VE-2 / GSR 18 VE-2

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic.

GSB 12 VE-2 / GSB 14,4 VE-2 / GSB 18 VE-2

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic and for impact drilling in 
brick, brickwork and stone.

Product Features

The numbering of the product features refers to 
the illustration of the machine on the graphics 
page.

1

Keyless chuck

2

Torque preselection ring

3

Gear selector

4

Operating mode preselection ring
(GSB 12 VE-2 / GSB 14,4 VE-2 / GSB 18 VE-2)

5

Auxiliary handle (GSR 18 VE-2 / GSB 18 VE-2)

6

Battery unlocking button

7

Battery *

8

Screwdriver bit *

9

Rotational direction switch

10

On/Off switch

11

Auxiliary handle clamping band

12

Universal bit holder *

13

Securing screw for keyless chuck

14

Allen Key **

15

Brush holder

16

Cover lid

* Accessories shown or described are not part of the 
standard delivery scope of the product. A complete 
overview of accessories can be found in our acces-
sories program.
** Commercially available (not included in the deliv-
ery scope)

OBJ_BUCH-199-004.book  Page 19  Monday, August 17, 2009  8:32 AM