Black+Decker KR5010 - Инструкция по эксплуатации - Страница 4

4

ENGLISH

(Original instructions)

e.  Do not overreach. Keep proper footing 

and balance at all times.

 This enables 

better control of the power tool in 

unexpected situations.

f.  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 Loose clothes, jewellery or long 

hair can be caught in moving parts.

g.  If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these are 

connected and properly used.

 Use of 

dust collection can reduce dust-related 

hazards.

4.  Power tool use and care
a.  Do not force the power tool. Use the 

correct power tool for your application.

The correct power tool will do the job 

better and safer at the rate for which it 

was designed.

b.  Do not use the power tool if the switch 

does not turn it on and off.

 Any power 

tool that cannot be controlled with the 

switch is dangerous and must be 

repaired.

c.  Disconnect the plug from the power 

source and/or the battery pack from the 

power tool before making any 

adjustments, changing accessories, or 

storing power tools.

 Such preventive 

safety measures reduce the risk of 

starting the power tool accidentally.

d.  Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool. 

Power tools are dangerous in the hands 

of untrained users.

e.  Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power 

tools operation. If damaged, have the 

power tool repaired before use.

 Many 

accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind 

and are easier to control.

g.  Use the power tool, accessories and tool 

bits etc., in accordance with these 

instructions, taking into account the 

working conditions and the work to be 

performed.

 Use of the power tool for 

operations different from those intended 

could result in a hazardous situation.

5.  Service
a.  Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts.

 This will 

ensure that the safety of the power tool is 

maintained.

Additional safety instructions for 

hammer drill

•  Wear ear protectors with impact drills. 

Exposure to noise can cause hearing loss.

•  Hold power tool by insulated gripping 

surfaces when performing an operation 

where the cutting tool may contact 

hidden wiring or its own cord. 

Contact 

with a “live” wire will also make exposed 

metal parts of the power tool “live” and 

shock the operator.

•  Use clamps or another practical way to 

secure and support the workpiece to a 

stable platform. 

Holding the work by 

hand or against your body leaves it 

unstable and may lead to loss of control.

•  Before drilling into walls, floors or ceilings 

check for the location of wiring and 

pipes.

•  Avoid touching the tip of a drill bit just 

after drilling, as it may be hot.

Vibration

The declared vibration emission values 

stated in the technical data and the 

declaration of conformity have been 

measured in accordance with a standard test 

method provided by EN 60745 and may be 

used for comparing one tool with another. 

The declared vibration emission value may 

also be used in a preliminary assessment of 

exposure.

Warning!

 The vibration emission value 

during actual use of the power tool can 

differ from the declared value depending on 

the ways in which the tool is used. The 

vibration level may increase above the level 

stated.