Black Decker KR 50 RE - Инструкция по эксплуатации - Страница 3

3

ENGLISH

Intended use

Your Black & Decker hammer drill has been 
designed for drilling in wood, metal, plastics, and 
masonry as well as for screwdriving purposes.
This tool is intended for consumer use only.

General safety rules

Warning!

 Read all instructions. Failure to follow 

all instructions listed below may result in electric 
shock, fi re and/or serious injury. The term “power 
tool” in all of the warnings listed below refers to 
your mains operated (corded) power tool or battery 
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.

1. Work 

area

a.  Keep work area clean and well lit.

 Cluttered 

and dark areas invite accidents.

b.  Do not operate power tools in explosive 

atmospheres, such as in the presence of 
fl ammable liquids, gases or dust.

 Power 

tools create sparks which may ignite the dust or 
fumes.

c.  Keep children and bystanders away while 

operating a power tool.

 Distractions can 

cause you to lose control.

2. Electrical 

safety

a.  Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 
not use any adapter plugs with earthed 
(grounded) power tools.

 Unmodifi ed plugs 

and matching outlets will reduce risk of electric 
shock.

b.  Avoid body contact with earthed or 

grounded surfaces such as pipes, radiators, 
ranges and refrigerators.

 There is an 

increased risk of electric shock if your body is 
earthed or grounded.

c.  Do not expose power tools to rain or wet 

conditions.

 Water entering a power tool will 

increase the risk of electric shock.

d.  Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the 
power tool. Keep cord away from heat, oil, 
sharp edges or moving parts.

 Damaged or 

entangled cords increase the risk of electric 
shock.

e.  When operating a power tool outdoors, use 

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

3. Personal 

safety

a.  Stay alert, watch what you are doing and 

use common sense when operating a 
power tool. Do not use a power tool while 
you are tired or under the infl uence of 
drugs, alcohol or medication.

 A  moment  of 

inattention while operating power tools may 
result in serious personal injury.

b.  Use safety equipment. Always wear eye 

protection.

 Safety equipment such as dust 

mask, non-skid safety shoes, hard hat, or 
hearing protection used for appropriate 
conditions will reduce personal injuries.

c.  Avoid accidental starting. Ensure the switch 

is in the off position before plugging in.

Carrying power tools with your fi nger on the 
switch or plugging in power tools that have the 
switch on invites accidents.

d.  Remove any adjusting key or wrench before 

turning the power tool on.

 A wrench or a key 

left attached to a rotating part of the power tool 
may result in personal injury.

e.  Do not overreach. Keep proper footing 

and balance at all times.

 This enables 

better control of the power tool in unexpected 
situations.

f.  Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing and 
gloves away from moving parts.

 Loose 

clothes, jewellery or long hair can be caught in 
moving parts.

g.  If devices are provided for the connection 

of dust extraction and collection facilities, 
ensure these are connected and properly 
used.

 Use of these devices can reduce dust 

related hazards.

4.  Power tool use and care
a.  Do not force the power tool. Use the correct 

power tool for your application.

 The correct 

power tool will do the job better and safer at the 
rate for which it was designed.

b.  Do not use the power tool if the switch 

does not turn it on and off.

 Any power tool 

that cannot be controlled with the switch is 
dangerous and must be repaired.

c.  Disconnect the plug from the power source 

before making any adjustments, changing 
accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally.