Black&Decker GoPak 12В USB BDCHD12S1 - Инструкция по эксплуатации - Страница 6

6

ENGLISH

(Original instructions)

g.  Follow all charging instructions and do 

not charge the battery pack or tool 

outside the temperature range specified 

in the instructions. 

Charging improperly 

or at temperatures outside the specified 

range may damage the battery and 

increase the risk of fire.

6. Service

a.  Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts.

 This will 

ensure that the safety of the power tool 

is maintained.

b.  Never service damaged battery packs. 

Service of battery packs should only be 

performed by the or authorized service 

providers.

7.  Drill safety warnings

1)  Safety instructions for all operations

a.  Wear ear protectors when impact 

drilling. 

Exposure to noise can cause 

hearing loss.

b.  Use the auxiliary handle(s).

 Loss of 

control can cause personal injury.

c.  Brace the tool properly before use. 

This 

tool produces a high output torque and 

without properly bracing the tool during 

operation, loss of control may occur 

resulting in personal injury.

d.  Hold the power tool by insulated 

gripping surfaces, when performing an 

operation where the cutting accessory 

may contact hidden wiring or its own 

cord. 

Cutting accessory contacting a 

“live” wire may make exposed metal 

parts of the power tool “live” and could 

give the operator an electric shock.

2)  Safety instructions when using long drill 

bits

a.  Never operate at higher speed than the 

maximum speed rating of the drill bit. 

At 

higher speeds, the bit is likely to bend if 

allowed to rotate freely without 

contacting the workpiece, resulting in 

personal injury.

b.  Always start drilling at low speed and 

with the bit tip in contact with the 

workpiece.

 At higher speeds, the bit is 

likely to bend if allowed to rotate freely 

without contacting the workpiece, 

resulting in personal injury.

c.  Apply pressure only in direct line with 

the bit and do not apply excessive 

pressure.

 Bits can bend causing breakage 

or loss of control, resulting in personal 

injury.

Additional power tool safety 

warnings

Warning!

 Additional safety warnings for 

drill/drivers.
•  Use clamps or another practical way to 

secure and support the workpiece to a 

stable platform Holding the work by hand 

or against your body leaves it unstable 

and may lead to loss of control.

•  Before drilling into walls, floors or ceilings 

check for the location of wiring and 

pipes.

•  Avoid touching the tip of a drill bit just 

after drilling, as it may be hot.

•  This tool is not intended for use by 

persons(including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible for 

their safety. Children should be 

supervised to ensure that they do not 

play with the appliance.

•  The intended use is described in this 

instruction manual. The use of any 

accessory or attachment or performance 

of any operation with this tool other than 

those recommended in this instruction 

manual may present a risk of personal 

injury and/or damage to property.

Safety of others

•  This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible for 

their safety.