Black+DECKER EPC128BK - Инструкция по эксплуатации - Страница 5

5

ENGLISH

Intended use

Your Black & Decker drill/screwdriver EPC126/
EPC146/EPC186 has been designed for 
screwdriving applications and for drilling in wood, 
metal and plastics.

Your Black & Decker drill/screwdriver EPC128/
EPC148/EPC188 has been designed for 
screwdriving applications and for drilling in wood, 
metal, plastics and soft masonry. This tool is 
intended for consumer use only.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and 
all instructions. 

Failure to follow the 

warnings and instructions listed below may 
result in electric shock, fi re and/or serious 
injury.

Save all warnings and instructions for future 
reference. 

The term “power tool” in all of the 

warnings listed below refers to your mains 
operated (corded) power tool or battery operated 
(cordless) power tool.

1.

Work area safety

a.  Keep work area clean and well lit. 

Cluttered 

or dark areas invite accidents.

b.

Do not operate power tools in explosive 
atmospheres, such as in the presence of 
fl ammable liquids, gases or dust. 

Power 

tools create sparks which may ignite the dust 
or fumes.

c.

Keep children and bystanders away while 
operating a power tool. 

Distractions can 

cause you to lose control.

2.

Electrical safety

a.  Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 
not use any adapter plugs with earthed 
(grounded) power tools. 

Unmodifi ed plugs 

and matching outlets will reduce risk of electric 
shock.

b.

Avoid body contact with earthed or 
grounded surfaces such as pipes, 
radiators, ranges and refrigerators. 

There is 

an increased risk of electric shock if your body 
is earthed or grounded.

c.

Do not expose power tools to rain or wet 
conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d.

Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the 
power tool. Keep cord away from heat, oil, 
sharp edges or moving parts. 

Damaged or 

entangled cords increase the risk of electric 
shock.

e.

When operating a power tool outdoors, use 
an extension cord suitable for outdoor use. 

Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

f.

If operating a power tool in a damp location 
is unavoidable, use a residual current 
device (RCD) protected supply. 

Use of an 

RCD reduces the risk of electric shock.

3.

Personal safety

a.  Stay alert, watch what you are doing 

and use common sense when operating 
a power tool. Do not use a power tool while 
you are tired or under the infl uence of 
drugs, alcohol or medication. 

A moment of 

inattention while operating power tools may 
result in serious personal injury.

b.

Use personal protective equipment. Always 
wear eye protection. 

Protective equipment 

such as dust mask, non-skid safety shoes, 
hard hat, or hearing protection used for 
appropriate conditions will reduce personal 
injuries.

c.

Prevent unintentional starting. Ensure 
the switch is in the off-position before 
connecting to power source and/or battery 
pack, picking up or carrying the tool. 

Carrying power tools with your fi nger on the 
switch or energising power tools that have the 
switch on invites accidents.

d.

Remove any adjusting key or wrench 
before turning the power tool on. 

A wrench 

or a key left attached to a rotating part of the 
power tool may result in personal injury.

e.

Do not overreach. Keep proper footing 
and balance at all times. 

This enables 

better control of the power tool in unexpected 
situations.

f.

Dress properly. Do not wear loose clothing 
or jewellery. Keep your hair, clothing and 
gloves away from moving parts. 

Loose 

clothes, jewellery or long hair can be caught in 
moving parts.

g.

If devices are provided for the connection 
of dust extraction and collection facilities, 
ensure these are connected and properly 
used. 

Use of dust collection can reduce dust-

related hazards.