Metabo MFE 65 - Инструкция по эксплуатации - Страница 11

ENGLISH

en

11

Original instructions

We declare under our sole responsibility: These 

wall chasers, identified by type and serial number 

*1), comply with all relevant requirements of the 

directives *2) and standards *3). Technical file at *4) 

- see page 3.

The machine is designed for cutting or slitting 

channels (chasing) in primarily mineral based 

materials such as reinforced concrete, masonry 

and paving, while firmly supported on the level 

surface, without water.
Do not use abrasive cut-off wheels.

Use only diamond cut-off wheels.
Materials that generate dusts or vapours that may 

be harmful to health must not be processed.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

4.1 Safety instructions for abrasive cut-off 

machines

a) 

The guard belonging to the power tool must 

be securely attached and positioned for 

maximum safety so that the minimum area of 

the wheel is exposed towards the operator. 

Ensure that neither you or bystanders are 

positioned within the plane of the rotating 

abrasive wheel.

The guard helps to protect 

operator from broken wheel fragments and 

accidental contact with wheel.

b) 

Only use diamond cut-off wheels for your 

power tool.

Just because the accessory can be 

attached to your power tool, it does not assure safe 

operation.

c) 

The rated speed of the accessory must be at 

least equal to the maximum speed marked on 

the power tool.

Accessories running faster than 

their rated speed can break and fly apart.

d) 

Abrasive wheels must only be used for the 

applications recommended. e.g.: Never use the 

side surface of a cut-off wheel for grinding.

Abrasive cut-off wheels are intended for peripheral 

grinding, side forces applied to these wheels may 

cause them to shatter.

e) 

Always use undamaged wheel flanges that 

are of correct size and shape for your selected 

wheel. 

Proper wheel flanges support the wheel 

thus reducing the possibility of wheel breakage.

f) 

The outside diameter and the thickness of 

your accessory must be within the capacity 

rating of your power tool.

Incorrectly sized 

accessories cannot be adequately guarded or 

controlled.

g) 

The abrasive wheels and flange must fit 

precisely onto your power tool's grinding 

spindle.

Accessories with arbour holes that do not 

fit the power tool's grinding spindle will run out of 

balance, vibrate excessively and may cause loss of 

control.

h) 

Do not use damaged abrasive wheels. 

Before each use, check the abrasive wheels for 

chips and cracks. If the power tool or the 

abrasive wheel is dropped, inspect for damage. 

Never use a damaged abrasive wheel. Once 

you have checked and installed the wheel, 

position yourself and bystanders away from 

the plane of the rotating wheel and run the 

power tool at maximum no-load speed for one 

minute.

Damaged abrasive wheels will normally 

break apart during this test period.

i) 

Wear personal protective equipment. 

Depending on application, use face shield, 

safety goggles or safety glasses. As 

appropriate, wear dust mask, hearing 

protectors, gloves and workshop apron 

capable of stopping small abrasive or 

workpiece fragments.

The eye protection must be 

capable of stopping flying debris generated by 

various operations. The dust mask or respirator 

must be capable of filtering particles generated by 

your operation. Prolonged exposure to high 

intensity noise may cause hearing loss.

j) 

Keep bystanders a safe distance away from 

the work area. Anyone entering the work area 

must wear personal protective equipment.

Fragments of workpiece or of a broken accessory 

may fly away and cause injury beyond immediate 

area of operation.

k) 

Hold the power tool by insulated gripping 

surfaces only, when performing an operation 

where the cutting accessory may contact 

hidden wiring or its own cord.

Cutting accessory 

contacting a "live" wire may make exposed metal 

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions