Sparky M 1200CES - Инструкция по эксплуатации - Страница 10

Шлифмашины Sparky M 1200CES - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 138
Загружаем инструкцию
background image

8

EN

M 750 HD ● M 750E HD ● M 850 HD ● M 850E HD ● M 1050 HD ● M 1050E HD ● M 1200 HD

M 1200E plus HD ● M 1200CES HD ● M 1400CES HD ● M 1400CES plus HD ● M 1400CS plus HD

wheel may bind, walk up or kickback if the 

power tool is restarted in the workpiece.

e) 

Support  panels  or  any  oversized  work-

piece  to  minimize  the  risk  of  wheel 

pinching and kickback. Large workpiec-

es  tend  to  sag  under  their  own  weight.

 

Supports  must  be  placed  under  the  work-

piece  near  the  line  of  cut  and  near  the 

edge of the workpiece on both sides of the 

wheel.

f) 

Use extra caution when making a “pock-

et cut” into existing walls or other blind 

areas. 

The  protruding  wheel  may  cut  gas 

or  water  pipes,  electrical  wiring  or  objects 

that can cause kickback.

Safety  Warnings  Specific  for  Sanding 

Operations:

a) 

Do not use excessively oversized sand-

ing  disc  paper.  follow  manufacturer’s 

recommendations,  when  selecting 

sanding  paper.

 

Larger  sanding  paper  ex-

tending  beyond  the  sanding  pad  presents 

a  laceration  hazard  and  may  cause  snag-

ging, tearing of the disc or kickback.

Safety  Warnings  Specific  for  Polishing 

Operations:

a) 

Do not allow any loose portion of the po-

lishing bonnet or its attachment strings 

to  spin  freely.  Tuck  away  or  trim  any 

loose  attachment  strings.

  Loose  and 

spinning  attachment  strings  can  entangle 

your fingers or snag on the workpiece.

Safety  Warnings  Specific  for  Wire 

Brushing Operations:

a)

 Be  aware  that  wire  bristles  are  thrown 

by  the  brush  even  during  ordinary  op-

eration.

 

Do not overstress the wires by ap-

plying excessive load to the brush. The wire 

bristles  can  easily  penetrate  light  clothing 

and/or skin.

b) 

If the use of a guard is recommended for 

wire brushing, do not allow any interfer-

ence of the wire wheel or brush with the 

guard.

 

Wire wheel or brush may expand in 

diameter  due  to  work  load  and  centrifugal 

forces.

Know your product

Before  using  the  power  tool,  familiarize  your-

self  with  all  the  operating  features  and  safety 

requirements.

Use  the  tool  and  accessories  only  for  the  ap-

plications  intended.  All  other  applications  are 

expressly ruled out.
  1.  Spindle

  2.1. Wheel guard for grinding wheel

  2.2. Wheel guard for cutting wheel*

  3.  Support flange

  4.1. Grinding wheel (Use only with 

 

   

a wheel guard for grinding wheel!)*

  4.2. Cutting wheel (Use only with  

 

   

a wheel guard for cutting wheel!)*

  5.  Fixing flange

  6.  Auxiliary handle

  7.  ON/OFF switch

  8.  Electronic  regulator  of  rotation  speed 

    (M  750E  HD,  M  850E  HD,  M  1050E  HD,  

    M  1200E  plus  HD,  M  1200CES  HD,  

    M 1400CES HD, M 1400CES plus HD)

  9.  Spindle lock button

ACCESSORIES TO BE USED WITH 

THIS POWER TOOL

  10.  Wire cup brush*

  11.  Plastic (rubber) backing pad*

  12.  Sandpaper or polishing bonnet*

  13.  Lock nut*
* The additional accessories shown in the illus-

trations or described in the text are not included 

in the delivery.

Operation

These  power  tools  are  supplied  from  single-

phase  alternating  current  mains  only.  They 

are  double  insulated  according  to  EN  60745, 

IEC 60745-1 and can be connected to grounded 

or not grounded sockets. This power tool is radio 

suppressed in compliance with EMC Directive.

This power tool is designed for cutting, grinding 

and  brushing  mainly  metals  without  using  wa-

ter.

PRIOR TO INITIAL OPERATION

▪  The machine may be delivered with the wheel 

guard mounted at the factory. Ensure that the 

wheel  guard  is  mounted  properly  and  fixed 

reliably  prior  to  the  initial  and  any  following 

operation.

▪  The machine may be delivered with the wheel 

mounted at the factory. Ensure that the wheel 

is mounted properly and fixed reliably prior to 

the initial and any following operation.

▪  Make  sure  the  power  supply  voltage  corre

-

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Sparky M 1200CES?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"