Sparky EX 150E - Инструкция по эксплуатации - Страница 9

7

Original instructions

EN

DUST EXTRACTION

The efficiency and durability of sandpaper are much im

-

proved by dust extraction through the apertures in the 

disc and sandpaper. The dust collector bag (8) must be 

emptied regularly.

EXTERNAL DUST EXTRACTION

The dust extraction adapter (9) with inner diameter Ø35 

mm ensures coupling to a vacuum cleaner in case of in-

creased dust generation. Dismount the collector bag (8) 

and fasten the machine to a vacuum cleaner.

ACCESSORIESTOBE USED WITH THIS 

POWER TOOL

EX 150E

Sandpaper Ø150 mm (P80, P120, P180) - 3 pcs., adapt-

er - 1 pc., dust bag - 1 pc., guide - 1 pc.

EX 150CE

Sandpaper Ø150 mm (P60, P80, P120, P180, P240) - 5 

pcs., adapter - 1 pc., dust bag - 1 pc., guide - 1 pc.

VII - Maintenance 

WARNING:

  Always ensure that the tool is 

switched off and unplugged before attempting to per-

form inspection or maintenance.

BRUSH REPLACEMENT

When the carbon brushes are worn out both brushes 

must be replaced simultaneously with genuine brushes 

at SPARKY service centre for warranty and post-war-

ranty service.

GENERAL INSPECTION

Regularly inspect all fasteners and ensure they are prop-

erly tightened. Should any of the screws be loose, re-

tighten it immediately to avoid hazards.

If the replacement of the supply cord is necessary, this 

has to be done by the manufacturer or his agent in order 

to avoid a safety hazard.

CLEANING

For safe operation always keep the machine and its ven

-

tilation slots clean.

Regularly check to see if any dust or foreign matter has 

entered the ventilation slots and the grills around the 

switches. Use a soft brush and/or air jet to remove any 

accumulated dust. Wear safety glasses to protect your 

eyes whilst cleaning. 

Exterior plastic parts may be cleaned with a damp cloth 

and mild detergent if necessary.

WARNING:

 Never use alcohol, petrol or other 

cleaning agent. Never use caustic agents to clean 

plastic parts.

WARNING:

 Water must never come into con-

tact with the tool.

IMPORTANT!

 To assure product safety and reliability, 

repairs, maintenance and adjustment (including brush 

inspection and replacement) should be performed by 

certified service centres or other qualified service organ

-

isations, always using genuine replacement parts.

VIII - Warranty

The guarantee period for SPARKY power tools is deter-

mined in the guarantee card.

Faults due to normal wear, overloading or improper han

-

dling will be excluded from the guarantee.

Faults due to defective materials implemented as well as 

defects in workmanship will be corrected free of charge 

through replacement or repair.

The complaints for defective SPARKY power tools will 

be recognized if the machine is sent back to the dealer 

or is presented to the authorised warranty service centre 

undismantled, in its initial condition.

Notes

Carefully read the entire original instructions before us-

ing this product.

The manufacturer reserves the right to make changes 

and improvements to the products and to alter specifica

-

tions without prior notice.

Specifications may differ from country to country.

pages-EX 150E-2012.indd   7

19.11.2012 г.   10:05:34 ч.