Ryobi R18RT-0 (5133004366) - Инструкция по эксплуатации - Страница 6

4

| English

expansion when the accessory gets hot.

BALANCING ACCESSORIES

For precision work, it is important that all accessories 
be properly balanced. To balance an accessory, slightly 
loosen the collet nut and give the accessory or collet a 1/4 
turn. You should be able to tell by the sound and feel if 
the accessory is running in balance. Continue adjusting 
in this fashion until the best balance is achieved. Replace 
accessories if they become damaged or unbalanced.

LEARNING TO USE THE ROTARY TOOL

Hold the pen in your hand and get used to its weight, 
balance, and the taper of the housing. This taper permits 
the pen to be grasped like a pencil.

MAINTENANCE

 WARNING

The product should never be connected to a power supply 
when you are assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product will prevent 
accidental starting that could cause serious injury.

 WARNING

When servicing, use only original manufacturer’s 
replacement parts, accessories and attachments. Use of 
any other parts may create a hazard or cause product 
damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

 WARNING

Do not at any time let brake 

fl

 uids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact 
with plastic parts. They contain chemicals that can 
damage, weaken or destroy plastic.

 WARNING

For greater safety and reliability, all repairs should be 
performed by an authorised service centre.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
of as waste. The machine, accessories and 
packaging should be sorted for environment-
friendly recycling.

SYMBOLS ON THE PRODUCT

Safety alert

CE conformity

No-load speed

Rated speed

V

Volts
Direct current

EurAsian Conformity Mark

Please read the instructions carefully 
before starting the machine.

Ukrainian mark of conformity

Failure to keep long hair away from air 
inlet could result in personal injury.

Wear eye protection

Waste electrical products should not 
be disposed of with household waste. 
Please recycle where facilities exist. 
Check with your local authority or retailer 
for recycling advice.

SYMBOLS IN THIS MANUAL

Note

Parts or accessories sold separately

The following signal words and meanings are intended to 
explain the levels of risk associated with this product:

 DANGER

Indicates an imminently hazardous situation, which, if not 
avoided, will result in death or serious injury.

 WARNING

Indicates a potentially hazardous situation, which, if not 

avoided, could result in death or serious injury.

 CAUTION

Indicates a potentially hazardous situation, which, if not 
avoided, may result in minor or moderate injury.

CAUTION

(Without Safety Alert Symbol) Indicates a situation that 
may result in property damage.