Makita BO3710 - Инструкция по эксплуатации - Страница 6

6 ENGLISH

For hook-and-loop type of abrasive 

paper with pre-punched holes 

(optional accessory):

CAUTION:

• 

Always use hook-and-loop type of abrasive papers. 

Never use pressure-sensitive abrasive paper.

► 

Fig.5:

1.

 Screwdriver 

2.

 Screw

Remove the pad for the conventional type of abrasive paper 

from the tool with a screwdriver. Install the pad for the hook-

and-loop type of abrasive paper (optional accessory) on the 

tool. Tighten the screws firmly to secure the pad.

► 

Fig.6:

1.

 Abrasive paper 

2.

 Pad

Remove all dirt or foreign matter from the pad. Attach the paper 

to the pad, aligning the holes in the paper with those in the pad.

► 

Fig.7:

1.

 O-ring

CAUTION:

• 

When removing the pad, O ring may come out 

of the tool. When this occurs, return the O ring 

to the original position and then install the pad.

Dust bag (optional accessory)

► 

Fig.8:

1.

 Dust spout 

2.

 Dust bag

Attach the dust bag onto the dust spout. The dust spout is tapered. 

When attaching the dust bag, push it onto the dust spout firmly as 

far as it will go to prevent it from coming off during operation.

For the best results, empty the dust bag when it becomes approxi-

mately half full, tapping it lightly to remove as much dust as possible.

Installing filter (Optional accessory)

► 

Fig.9:

1.

 Holding tab

Make sure that the logo on the cardboard lip and the logo on 

the dust box are on the same side, then install the filter by 

fitting the cardboard lip in the groove of each holding tab.

► 

Fig.10:

1.

 Dust box 

2.

 Dust nozzle

Make sure that the logo on the cardboard lip and the logo 

on the dust nozzle are on the same side, then install the 

dust nozzle on the dust box. Removing dust box and filter.

► 

Fig.11:

1.

 Latch 

2.

 Dust nozzle

Remove the dust nozzle by pushing the two latches.

► 

Fig.12

Remove the filter first by pinching the logo side of its 

cardboard lip, then by pulling the cardboard lip down-

wards to move it out of the holding tab of the dust box.

OPERATION

Sanding operation

► 

Fig.13

CAUTION:

• 

Never run the tool without the abrasive paper. 

You may seriously damage the pad.

• 

Never force the tool. Excessive pressure may 

decrease the sanding efficiency, damage the 

abrasive paper or shorten tool life.

Hold the tool firmly. Turn the tool on and wait until it 

attains full speed. Then gently place the tool on the 

workpiece surface. Keep the pad flush with the work

-

piece and apply slight pressure on the tool.

MAINTENANCE

CAUTION:

• 

Always be sure that the tool is switched off and 

unplugged before attempting to perform inspec-

tion or maintenance.

NOTICE:

• 

Never use gasoline, benzine, thinner, alcohol or 

the like. Discoloration, deformation or cracks may 

result.

To maintain product SAFETY and RELIABILITY, 

repairs, carbon brush inspection and replacement, any 

other maintenance or adjustment should be performed 

by Makita Authorized Service Centers, always using 

Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

• 

These accessories or attachments are recom-

mended for use with your Makita tool specified 

in this manual. The use of any other accessories 

or attachments might present a risk of injury to 

persons. Only use accessory or attachment for 

its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Abrasive paper (with pre-punched holes)

• 

Hook-and-loop type of abrasive paper

• 

Punch plate

• 

Backing pad (For use with hook-and-loop type of 

abrasive paper)

• 

Backing pad (For use with conventional type of 

abrasive paper)

• 

Dust bag

• 

Dust box

• Filter

• 

Hose

NOTE:

• 

Some items in the list may be included in the 

tool package as standard accessories. They 

may differ from country to country.