Bosch GWS 24-230P (0.601.8C3.100) - Инструкция по эксплуатации - Страница 14

14

 | Français

Switch on the power tool
and position it with the
front part of the guide block
on the workpiece. Move the
power tool with a moderate
feed motion that is suited to
the material being ma-
chined.
When cutting especially
hard materials such as con-

crete with a high pebble content, the diamond cutting disc
can overheat and become damaged as a result. This is
clearly indicated by circular sparking, rotating with the dia-
mond cutting disc.
If this happens, stop cutting and allow the diamond cutting
disc to cool down by running the power tool for a short time
at maximum speed with no load.
Working noticeably slower and with circular sparking indic-
ate that the diamond cutting disc that has become dull. You
can resharpen the disc by briefly cutting into abrasive mater-
ial (e.g. lime-sand brick).

Information on structural design

Slots in load-bearing walls are subject to DIN 1053 part 1 or
country-specific regulations. These regulations must be ob-
served under all circumstances. Seek advice from the re-
sponsible structural engineer, architect or construction su-
pervisor before starting work.

Maintenance and Service

Maintenance and cleaning

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

u

In extreme conditions, always use a dust extractor if
possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD) upstream.

 When

machining metals, conductive dust can settle inside the
power tool, which can affect its protective insulation.

Store and handle the accessories carefully.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by 

Bosch

 or by an

after-sales service centre that is authorised to repair 

Bosch

power tools.

Dust box

To ensure optimum dust protection, we recommend clean-
ing the dust box 

(3)

 daily or at regular intervals after use.

The cleaning intervals depend on usage.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Malaysia

Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Disposal

The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.

Do not dispose of power tools along with
household waste.

Français

Consignes de sécurité

Avertissements de sécurité généraux pour l’outil

AVERTISSE-

MENT

Lire tous les avertissements de sé-
curité et toutes les instructions. 

Ne pas suivre les avertissements et

instructions peut donner lieu à un choc électrique, un incen-
die et/ou une blessure sérieuse.

Conserver tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.

Le terme «outil» dans les avertissements fait référence à
votre outil électrique alimenté par le secteur (avec cordon
d’alimentation) ou votre outil fonctionnant sur batterie (sans
cordon d’alimentation).

Sécurité de la zone de travail

u

Conserver la zone de travail propre et bien éclairée. 

Les zones en désordre ou sombres sont propices aux ac-
cidents.

u

Ne pas faire fonctionner les outils électriques en at-
mosphère explosive, par exemple en présence de li-
quides inflammables, de gaz ou de poussières.

 Les ou-

tils électriques produisent des étincelles qui peuvent en-
flammer les poussières ou les fumées.

1 609 92A 5TF | (20.11.2020)

Bosch Power Tools