Bosch GEX 150 AC 0601372768 - Инструкция по эксплуатации - Страница 17

 English | 

17

Bosch Power Tools

1 609 929 Y19 | (15.3.11)

Fine Sanding

Attach a sanding sheet with fine grain.
By lightly varying the application pressure or changing the or-

bital stroke rate (GEX 125 AC/GEX 150 AC), the sanding 

plate stroke rate can be reduced whereby the orbital action is 

maintained.
With moderate pressure, move the machine in a circular pat-

tern or alternately in lengthwise and crosswise directions 

over the workpiece. Do not tilt the machine to avoid sanding 

through the workpiece (e. g. when sanding veneer).
After finishing the working procedure, switch the power tool 

off.

Polishing (GEX 125 AC/GEX 150 AC)

For the polishing of weathered paint or buffing out scratches 

(e. g., acrylic glass), the machine can be equipped with appro-

priate polishing accessories such as lamb’s wool bonnet, pol-

ishing felt or sponge (accessories).
Select a low stroke rate (setting 1 – 2) for polishing in order to 

avoid excessive heating of the surface.
Apply the polish onto a somewhat smaller surface than you in-

tend to polish. Work the polishing agent in with a suitable pol-

ishing tool applying it crosswise or with circular motion and 

moderate pressure.
Do not allow the polishing agent to dry out on the surface, oth-

erwise the surface can become damaged. Do not subject the 

surface to be polished to direct sunlight.
Clean the polishing accessories regularly to ensure good pol-

ishing results. Wash out polishing accessories with a mild de-

tergent and warm water; do not use paint thinner.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself, pull the mains 

plug.

f

For safe and proper working, always keep the machine 

and ventilation slots clean.

If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by 

an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of 

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare 

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of 

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa
Customer service

Hotline: +27 (011) 6 51 96 00

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: +27 (011) 4 93 93 75

Fax: +27 (011) 4 93 01 26

E-Mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre

143 Crompton Street

Pinetown

Tel.: +27 (031) 7 01 21 20

Fax: +27 (031) 7 01 24 46

E-Mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park

Milnerton

Tel.: +27 (021) 5 51 25 77

Fax: +27 (021) 5 51 32 23

E-Mail: bsc@zsd.co.za

OBJ_BUCH-424-004.book  Page 17  Tuesday, March 15, 2011  3:24 PM