Ryobi ONE+ RY18PSA-0 - Инструкция по эксплуатации - Страница 3

1

English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

Safety, performance, and dependability have been given 
top priority in the design of your cordless pruning saw.

INTENDED USE

The cordless pruning saw is intended to be used only by 
adults who have read and understood the instructions and 
warnings in this manual, and can be considered responsible 
for their actions.
The product is intended only for outdoor use in a well-
ventilated area.
The product is designed for the cutting and pruning of small 
limbs and branches with a diameter that is less than or 
equal to 80 mm.
The product is designed for handheld use. The product 
is not to be mounted onto a workbench unless speci

fi

 c 

instructions about how to do this are given by the 
manufacturer of the product.
Do not use the product for any other purpose.

GENERAL POWER TOOL SAFETY WARNINGS

 WARNING

Read all safety warnings, instructions, illustrations 
and specifications provided with this power tool.

Failure to follow all instructions listed below may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

WORK AREA SAFETY

■

Keep work area clean and well lit.

 Cluttered or dark

areas invite accidents.

■

Do not operate power tools in explosive
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks

which may ignite the dust or fumes.

■

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose

control.

ELECTRICAL SAFETY

■

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk
of electric shock.

■

Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.

 There is an increased risk of electric

shock if your body is earthed or grounded.

■

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

■

Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords increase 

the risk of electric shock.

■

When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

 Use of a

cord suitable for outdoor use reduces the risk of electric 
shock.

■

If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.

 Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

■

Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the 
influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in
serious personal injury.

■

Use personal protective equipment. Always wear
eye protection.

 Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.

■

Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.

 Carrying power tools with your finger on the

switch or energising power tools that have the switch
on invites accidents.

■

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to

a rotating part of the power tool may result in personal
injury.

■

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power

tool in unexpected situations.

■

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. 

Loose clothes, jewellery or long hair can 

be caught in moving parts.

■

If devices are provided for the connection of dust
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection

can reduce dust-related hazards.

■

Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety 
principles. A careless action can cause severe injury
within a fraction of a second.

POWER TOOL USE AND CARE

■

Do not force the power tool. Use the correct power tool 
for your application.

 The correct power tool will do the

job better and safer at the rate for which it was designed.

■

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

■

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,