Bosch AdvancedCut 18 - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

1 609 92A 3Y5 | (25.4.18)

Technical Data

Noise/Vibration Information

Sound emission values determined according to 
EN 62841-2-11.

Typically the A-weighted noise levels of the product are: 
Sound pressure level 75 dB(A); Sound power level 86 dB(A). 
Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 62841-2-11: 
Cutting board with NanoBlade Wood Speed 65 mm: 
a

h

= 2.5 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 62841 and may be used to compare one tool with another. 
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However, if the tool is used for different appli-
cations, with different accessories or insertion tools or is poorly 
maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may signifi-
cantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from 
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organise work patterns.

Assembly



Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.), remove the battery from the 
power tool. 

There is danger of injury when unintentionally 

actuating the On/Off switch.

Battery Charging



Use only the chargers listed in the technical data. 

Only 

these chargers are matched to the lithium-ion battery of 
your power tool.

Note: 

The battery supplied is partially charged. To ensure full 

capacity of the battery, completely charge the battery in the 
battery charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without 
reducing its service life. Interrupting the charging procedure 
does not damage the battery.

Inserting/Removing the Battery 
(see figure A)

Insert the battery into the machine as shown. The battery 
must be felt to engage.

To remove the battery 

6

, press the unlocking buttons 

5

 and 

pull the battery out of the machine to the rear. 

Do not exert 

any force.

Inserting/Replacing the Saw Blade



When changing the saw blade, do not hold the tool with 
one hand on or around the On/Off switch and lock off. 

There is danger of injury when the On/Off switch is unin-
tentionally actuated.



When mounting or changing the saw blade, wear pro-
tective gloves. 

Application tools are sharp and can be-

come hot when used for prolonged periods of time.



Do not pull on the chain and do not pull the chain off the 
guide unit!



Always replace a complete saw blade with a complete 
saw blade! The chain cannot be replaced on its own.

Selecting a Saw Blade



Use only clean saw blades. Ensure that the SDS saw 
blade holder is also free of chips and sawdust.

Use only saw blades suitable for the material being worked.

The saw blade should not be longer than required for the in-
tended cut. 



Avoid skin contact when you want to replace a saw 
blade and wear protective gloves. 

The saw blade can be-

come hot during prolonged use.

All-purpose saw

AdvancedCut 18

Article number

3 603 CD5 1..

Rated voltage

V=

18

Cutting depth, max.

mm

65

Weight according to 
EPTA-Procedure 01:2014

kg

1.1

Permitted ambient temperature
– during  charging
– during operation

1)

 and during 

storage

° C

° C

0 ... + 45

– 20 ... + 50

Recommended batteries

PBA 18 V...V-

PBA 18 V...W-

Recommended chargers

AL 18.. CV
AL 22.. CV

1) limited performance at temperatures < 0 ° C

Saw blade

Cutting depth

Part number

Materials

NanoBlade Wood Basic 

50 mm

2 609 256 D83

Wood, Plastic (PVC, PC, PMMA)

NanoBlade Wood Speed

50 mm

2 609 256 D84

Wood, Plastic (PVC, PC, PMMA)

NanoBlade Hardwood Basic

50 mm

2 609 256 D85

Hardwood, Plastic (PVC, PC, PMMA)

NanoBlade Wood Speed

65 mm

2 609 256 D86

Wood, Plastic (PVC, PC, PMMA)

OBJ_BUCH-3326-001.book  Page 15  Wednesday, April 25, 2018  2:48 PM