Bosch AdvancedCut 18 - Инструкция по эксплуатации - Страница 14

14

 | English 

1 609 92A 3Y5 | (25.4.18)

Bosch Power Tools



Do not expose a battery pack or tool to fire or excessive 
temperature. 

Exposure to fire or temperature above 

130 ° C may cause explosion.



Follow all charging instructions and do not charge the 
battery pack or tool outside the temperature range 
specified in the instructions. 

Charging improperly or at 

temperatures outside the specified range may damage the 
battery and increase the risk of fire.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.



Never service damaged battery packs. 

Service of bat-

tery packs should only be performed by the manufacturer 
or authorized service providers.

Safety Warnings for All-Purpose Saws



Hold the power tool by insulated gripping surfaces, 
when performing an operation where the cutting ac-
cessory may contact hidden wiring. 

Cutting accessory 

contacting a “live” wire may make exposed metal parts of 
the power tool “live” and could give the operator an electric 
shock.



Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform. 

Holding the 

work by your hand or against the body leaves it unstable 
and may lead to loss of control.



Keep hands away from the sawing range. Do not reach 
under the workpiece. 

Contact with the saw blade can 

lead to injuries.



Apply the machine to the workpiece only when 
switched on. 

Otherwise there is danger of kickback when 

the cutting tool jams in the workpiece.



When sawing, the base plate 2 must always faces 
against the workpiece. 

The saw blade can become 

wedged and lead to loss of control over the machine.



When the cut is completed, switch off the machine and 
then pull the saw blade out of the cut only after it has 
come to a standstill. 

In this manner you can avoid kick-

back and can place down the machine securely.



Use only undamaged saw blades that are in perfect con-
dition. 

Bent or dull saw blades can break, negatively influ-

ence the cut, or lead to kickback.



Use appropriate detectors to determine if utility lines 
are hidden in the work area or call the local utility com-
pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dam-
age.



Provide for good footing at all times when operating 
the power tool, especially when using it on steps or lad-
ders. 

Slippery or unstable surfaces can cause you to lose 

your balance or control over the power tool.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



The chain of the saw blade can rip if subjected to exces-
sive strain. In this case, change the tool/saw blade.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and mois-
ture. 

Danger of explosion.



In case of damage and improper use of the battery, 
vapours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.

Product Description and 
Specifications

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

Intended Use

This power tool is intended for household use. It is intended 
for cutting branches, slats, hard and soft wood. It is suitable 
for straight cuts.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Saw blade

2

Base plate

3

Lock-off button for On/Off switch

4

On/Off switch

5

Battery unlocking button

6

Battery pack

7

Battery charge-control indicator

8

Cover of saw blade receptacle

9

Locking lever of cover

10

Riving knife

11

Handle (insulated gripping surface)

12

Carrying strap

13

SDS saw blade receptacle

OBJ_BUCH-3326-001.book  Page 14  Wednesday, April 25, 2018  2:48 PM