Bosch AdvancedCut 18 - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

1 609 92A 3Y5 | (25.4.18)

Electrical safety



Power tool plugs must match the outlet. Never modify 
the plug in any way. Do not use any adapter plugs with 
earthed (grounded) power tools. 

Unmodified plugs and 

matching outlets will reduce risk of electric shock.



Avoid body contact with earthed or grounded surfaces, 
such as pipes, radiators, ranges and refrigerators. 

There is an increased risk of electric shock if your body is 
earthed or grounded.



Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of electric 
shock.



Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges or moving parts. 

Damaged or 

entangled cords increase the risk of electric shock.



When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. 

Use of a cord suitable 

for outdoor use reduces the risk of electric shock.



If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected 
supply. 

Use of an RCD reduces the risk of electric shock.

Personal safety



Stay alert, watch what you are doing and use common 
sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication. 

A moment of inattention while op-

erating power tools may result in serious personal injury.



Use personal protective equipment. Always wear eye 
protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat or hearing protection used 
for appropriate conditions will reduce personal injuries.



Prevent unintentional starting. Ensure the switch is in 
the off-position before connecting to power source and/ 
or battery pack, picking up or carrying the tool. 

Carrying 

power tools with your finger on the switch or energising 
power tools that have the switch on invites accidents.



Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.



Do not overreach. Keep proper footing and balance at 
all times. 

This enables better control of the power tool in 

unexpected situations.



Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair and clothing away from moving 
parts. 

Loose clothes, jewellery or long hair can be caught 

in moving parts.



If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

Use of dust collection can re-

duce dust-related hazards.



Do not let familiarity gained from frequent use of tools 
allow you to become complacent and ignore tool safety 
principles. 

A careless action can cause severe injury with-

in a fraction of a second.

Power tool use and care



Do not force the power tool. Use the correct power tool 
for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it 
on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power 
tool before making any adjustments, changing accesso-
ries, or storing power tools. 

Such preventive safety meas-

ures reduce the risk of starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of 
parts and any other condition that may affect the pow-
er tool’s operation. If damaged, have the power tool re-
paired before use. 

Many accidents are caused by poorly 

maintained power tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.



Keep handles and grasping surfaces dry, clean and free 
from oil and grease. 

Slippery handles and grasping sur-

faces do not allow for safe handling and control of the tool 
in unexpected situations.

Battery tool use and care



Recharge only with the charger specified by the manu-
facturer. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another bat-
tery pack.



Use power tools only with specifically designated bat-
tery packs. 

Use of any other battery packs may create a 

risk of injury and fire.



When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.



Do not use a battery pack or tool that is damaged or 
modified. 

Damaged or modified batteries may exhibit un-

predictable behaviour resulting in fire, explosion or risk of 
injury.

OBJ_BUCH-3326-001.book  Page 13  Wednesday, April 25, 2018  2:48 PM