Ardesto RVC-S1300W - Инструкция по эксплуатации - Страница 65

EN

65

Function Guidelines

Function Information

Scheduling

1.In standby mode, press this button and the   and 

88 

on the 

display screen will flash. then press Up/Down key to adjust the 
hour. 
2.Press the  button/  button and switch to for minute setting. 
3.After setting, press the   button or   button for saving. The 
cleaner will utter a sound after receiving the command from the 
remote control. 
4.Long-press the   button and you can cancel the presetting.

Auto-charging

1.Press this button to shift it to recharge mode.

Note:

 If the vacuum cleaner does not respond to commands from 

the remote control, check if the battery is dead. If the vacuum 
cleaner cannot be operated with a sufficient charge level, please 
recode the remote control.

Coding Steps of Remote Control: 

(Confirm whether the cleaner 

and the remote control have enough power first, and then operate 
as follows) Long press the   button on the remote control, and 
turn on the cleaner after 3 seconds. If the buzzer utters three 
sounds, it means the coding is successful.

Remarks:

 If no beep is heard, it means the coding fails. Repeat the above process.