Dreame L10S PRO - Инструкция по эксплуатации - Страница 9

Роботы-пылесосы Dreame L10S PRO - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 100
Загружаем инструкцию
background image

12

13

EN

EN

How to Use

7. Scheduled Cleaning

You can schedule cleaning time in the app. The robot will 

automatically start cleaning at the designated time and then 

return to the charging dock to recharge when the cleaning is 

done.

8. Additional App Functions

Follow the instructions on the app interface to use more 

functions. The version of the app might have been updated; 

please follow the instructions based on the current app version.

6. Spot Clean Mode

When the robot is paused or in Standby Mode, press and hold 

the button   for 3 seconds to start Spot Clean Mode. In this 

mode, it will clean a square-shaped area of 1.5 ×1.5 meters 

directly around the robot. When the spot cleaning is done, 

the robot will automatically return to its original location and 

power off.

Note:

 

When the robot is paused, activating Spot Clean Mode will end the current 

cleaning task.

1.5 meter

1.5 meter

9. Use the Mopping Function

How to Use

It is recommended that all floors are vacuumed at least three 

times before the first mopping session to achieve a better 

cleaning effect.
1) Dampen the mop pad, wring out excess water, and stick 

them onto the mop pad holder firmly. Then install the mopping 

module on the robot.

3) Press the button

   

or use the app to start cleaning.

2) Remove the water tank and fill it with water as shown in the 

figure, then put it back into place.

4) After cleaning task is done, remove the mop pad as shown 

in the diagram. To remove the water tank, press and hold the 

release clip on both sides, and drag them upward.

Note:

 When the robot is charging or not in use, remove the mopping module, pour 

out all the remaining water in the tank, and clean the mop pad to prevent mildew 

or odor.

 

·

Do not fill with hot water, which may cause distortion of the water tank.

 

·

Do not expose the tank to the sun directly.

 

·

If slow water flow occurs, or the outflow is not well-distributed, please clean the 

air hole in the tank.

Note:

 

·

It is not recommended to use the mopping function on carpets.

 

·

Use the app to adjust the water flow as required.

Note:

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Dreame L10S PRO?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"