Dreame L10S PRO - Инструкция по эксплуатации - Страница 8

10

11

EN

EN

xxxxxx' s  home

No home environment info

Devices            Rooms

Add a device

Scan

Simultaneously press and hold the buttons   and   until 

you hear a voice to indicate that the robot is waiting for the 

network configuration. Once the Wi-Fi indicator is blinking 

slowly, the Wi-Fi has been successfully reset.

The appliance works with the Mi Home/Xiaomi Home app, which can be used to control the appliance and make it interact with other smart devices.

Connecting with Mi Home/Xiaomi Home App

3. Reset Wi-Fi

Note: 

If your robot cannot connect to the app successfully, reset the Wi-Fi and add 

the device again.

Wi-Fi Indicator

·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected

·

Only 2.4GHz Wi-Fi is supported.

·

The version of the app might have been updated, please follow the instructions 

based on the current app version.

Note:

1. Download the Mi Home/Xiaomi Home App

Scan the QR code on the robot or search "Mi Home" or "Xiaomi 

Home" in the app store to download and install the app.

2. Add Device

Open the Mi Home/Xiaomi Home app, tap "   " in the upper 

right, and scan the QR code above again to add "DreameBot L10s 

Pro". Please follow the prompts to finish the Wi-Fi connection.

 Under the Cover

1. Turn On/Off

How to Use

Press and hold the button   for 3 seconds to turn on the 

robot. Once the power indicator turns solid white, the robot 

is in standby mode. To turn off the robot, press and hold the 

button    for 3 seconds when the robot is not moving. Turning 

off the robot will end the current cleaning task.

3. Cleaning Mode

DreameBot L10s Pro has four cleaning modes: Quiet, 

Standard, Strong and Turbo. The default mode is Standard. 

You can specify the cleaning mode in the app.

2. Start Cleaning

Press the button   briefly to turn on the robot. Upon activation, 

the robot will accurately map out a route, methodically clean 

along the edges and walls, then finish by cleaning each room 

in an S-shaped pattern to ensure a thorough job.

·

Before a cleaning task, make sure the robot is fully charged and starts from the 

charging dock. Do not move the charging dock while the robot is cleaning.

·

If the battery is too low, the robot will automatically return to the dock to charge. 

It will resume unfinished cleaning tasks after charged to the necessary battery 

level. (The breakpoint continuous cleaning function must be enabled on the app 

in advance.)

Note:

4. Pause/Sleep Mode

Pause: Press any button to pause the robot during cleaning.

Sleep Mode: The robot will automatically enter Sleep Mode 

after 10 minutes of inactivity, then the power and charging 

indicators will go off. To wake up the robot, press any button.

·

The robot will turn off automatically if left in Sleep Mode for more than 12 hours.

·

When the robot is paused, placing it onto the charging dock will end the current 

cleaning task.

Note:

5. Do Not Disturb (DND) Mode

DND Mode prevents the robot from automatically starting 

cleaning tasks, and the power indicator remains off. You can 

enable DND Mode or modify its hours in the app. (The mode is 

on by default from 22:00 to 08:00.)

·

Scheduled cleaning tasks will still be carried out during the DND period.

·

The robot will continue cleaning after the DND period ends.

Note: