DREAME Bot Robot Vacuum and Mop D9 Max Black (RLS5-BL1) - Инструкция по эксплуатации - Страница 12

8

EN

＞ 0.5 m

＞ 0.5 m

＞ 1.5 m

Note:

• 

Fully charge your robot before first-time use.

•  Don't install the mopping module while charging. Be extra careful with 

wet mop as it can damage the floor.

1. Remove the protective film

3. Place the charging dock on the level ground 

against the wall and connect it to a power outlet

2. Install the side brush

Click

4. Place the robot onto the charging dock to 

recharge. The robot will turn on automatically and 

begin recharging

Note:

•  Keep the immediate area 1.5m in front of the charger and 0.5m to both 

sides of the charging dock clear of objects.

•  To ensure you can connect to the robot with your phone well, make sure 

the robot and charging dock are within the range of Wi-Fi.

•  Do not place the charging dock in an area with direct sunlight or where 

other objects might block the signal, as this may hinder the robot from 

returning to the charging dock.

Note: 

Install the side brush until it clicks into place.

Preparation Before Use

Remove the protective films on the robot.

Tidy up Any 

Loose Cord

      Battery Level Indicator

• White: Battery level   

  is more than 15% 

• Orange: Battery 

  level is less than 15%