Xiaomi Mi Handheld Vacuum Cleaner Pro (G10) (MJSCXCQPT) - Инструкция по эксплуатации - Страница 38

Пылесос Xiaomi Mi Handheld Vacuum Cleaner Pro (G10) (MJSCXCQPT) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 165
Загружаем инструкцию
background image

26

27

FAQ

Error

Possible Cause

Solution

The vacuum cleaner does not work.

It is out of battery or has low battery.

Fully charge the vacuum cleaner, then 
resume use.

Wait until the vacuum cleaner cools down, 

then reactivate it.

Clear any blockages from suction opening 

or airway passage.

Empty the dust compartment and clean 

the filter.

Clear any blockages from the smart high  

torque brush bar and/or the extension rod.

Clear any blockages in the main suction 

opening or the extension rod.

Please contact after-sales service to 

arrange maintenance.

Only use the original charger to charge the 

vacuum cleaner.

The suction power reduces.

It enters into overheat protection mode 

triggered by a blockage.

Its suction opening or airway passage is blocked.

The dust compartment is full and/or the filter 

is clogged.

The smart high torque brush bar and/or the 

extension rod are blocked.

The main suction opening or the extension rod is 

blocked.

Battery pack is damaged.

The charger is incompatible.

The motor makes a strange noise.

The first indicator is red after 

turning on the vacuum cleaner.

The first indicator blinks red when 

charging the vacuum cleaner.

Error

Possible Cause

Solution

Make sure the charger is plugged in 

correctly.

The vacuum cleaner can be used normally.

Wait until the battery temperature 

normalizes, then resume use.

Clean or replace the water dispenser filter.

Clean or replace the mop pad.

The charger is not connected to the vacuum 

cleaner.

The battery is fully charged and went into sleep 

mode.

If the problem still persists after ruling out the above two possibilities, please contact after-

sales service for help.

The battery temperature is too low or too high.

The water dispenser filter is clogged.

The mop pad is dirty.

The battery indicator does not 
light up while charging.

The water tank does not dispense 
water, or dispenses water slowly.

The battery charges slowly.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Xiaomi Mi Handheld Vacuum Cleaner Pro (G10) (MJSCXCQPT)?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"