Zelmer 5500.3HT - Инструкция по эксплуатации - Страница 66

66 

−

  Insert the bent ending (

4

) of the hose into the vacuum cleaner inlet, later 

ending (handle) connect with telescope sucking pipe, 

−

  adjust the telescope sucking pipe length In 

desired working position (depending on 
user’s height) press 

„A” 

button and move 

in direction indicated by the arrow (x or y), 

−

  assemble right equipment, i.e. brush-nozzle, at the later ending of sucking 

pipes 

−

 take the power cord (

5

) out of the vacuum cleaner 

casing and connect it into the mains supply outlet,

ATTENTION!!! Be careful during pulling the cord out, 

the yellow mark on the cord show the 
end of the cord. 

−

  Start up the vacuum cleaner pressing the button (

6

) 

at the vacuum cleaner and adjust proper suction 

power with 

 or 

buttons. 

56B

SUCTION POWER ADJUSTMENT 

The vacuum cleaner is equipped with 
electronic power adjustment, which enables 
gradual power regulation. Power is adjusted 
with two micro switches (

,

): next power 

stages are indicated by particular diodes 
glowing. Pressing the button (

or

) shall 

cause increasing or reducing power 
according to marking. 
Vacuum cleaner start up with on/off button 
adjusts the setting on 3rd stage of Power 
adjustment - 3 diodes of 5 in five stages 
diode line glow. 
Recommended settings are: 
Stage 1– curtains vacuuming 
Stage 2– upholstery vacuuming 
Stage 3– economy power 
Stage 4– carpets vacuuming 
Stage 5– hard floor and gaps vacuuming 

ZELMER vacuum cleaners are also equipped with mechanical suction 
adjustment on hose handle. To reduce or increase suction power it is 
enough to open or close the valve, see the picture beside.

57B

FULL BAG INDICATOR 

Full bag indicator glowing (red colour), when the nozzle or brush is above the cleaned surface, 
informs us that it is necessary to empty „CYKLON” insert or to change dust bag. 
Full bag indicator can activate also in case of blocked sucking hose or one of connected accessories. 
In such case, remove the hose from front lid and clean the hose and connected accessories. 

58B

OUTLET FILTER EXCHANGE INDICATOR 

Outlet air HEPA13 filter shall be exchanged after max 1 year of usage, or when the surface is visibly dirty. 
Outlet filter exchange indicator glows (pulsating red colour) informing that it is necessary to exchange the 
filter. Simultaneously, sound signalization of inlet filter so called „Boozer” is on, and suction power is 
reduced to stage 1. 
It is possible to finish vacuuming with desired power by pressing 

button, which shall cause suction 

power increase. 

6

Cord rewind

button

Electro brush

socket

Full back

indicator

ON/OFF

button

„Autoreverse”

 knob

Full back

indicator

Suction power

adjustment button

Suction power

adjustment button