Philips FC9060 - Инструкция по эксплуатации - Страница 10

Пылесос Philips FC9060 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 136
Загружаем инструкцию
background image

Emptying the reusable dustbag (some countries only)

In some countries, this vacuum cleaner also comes with a reusable dustbag that can be used and 

emptied repeatedly. You can use the reusable dustbag instead of disposable dustbags.

To remove and inser t the reusable dustbag, simply follow the instructions in ‘Replacing the 

disposable dustbag’.

To empty the reusable dustbag:

  1 

 Slide the clip off the dustbag sideways.

  2 

 Shake out the contents into a dustbin.

  3 

 To close the dustbag, slide the clip back onto the bottom edge of the dustbag.

Cleaning and maintenance of filters

Always unplug the appliance before you clean or replace the filters.

Permanent motor protection filter

Clean the permanent motor protection filter ever y time you replace the dustbag. 

  1 

 Remove the dustbag holder with the dustbag (Fig. 28).

  2 

 Take the motor protection filter holder out of the appliance. Take the filter out of the 

holder.  (Fig. 32)

  3 

 Shake the filter over a dustbin to clean it.

  4 

 Put the clean filter back into the filter holder. Fit the two lugs of the filter holder behind the 

ridge at the bottom to ensure that it fits properly at the top. Then press the filter holder 

home (‘click’) (Fig. 33).

  5 

 Place the dustbag holder with the dustbag back into the appliance.

super Clean air filter (specific types only)

The Super Clean Air Filter located in the back of the appliance has electrostatically charged fibres. 

These fibres filter a large par t of the smaller par ticles from the exhaust air.

Replace the Super Clean Air filter ever y six months.This filter is not washable.

  1 

 Open the filter grille (Fig. 34).

  2 

 Remove the old filter (Fig. 35).

  3 

 Insert the new filter into the appliance.

  4 

 Close the filter grille (‘click’) (Fig. 36).

super Clean air hEPa 12 filter/ultra Clean air hEPa 13 filter

This appliance is equipped with either the Super Clean Air HEPA 12 filter or the Ultra Clean Air 

HEPA 13 filter. These filters are located in the back of the appliance. They are able to remove 99.5% 

and 99.95% respectively of all par ticles down to 0.0003mm in size from the outlet air. This not only 

includes normal house dust, but also harmful microscopic vermin such as dust mites and their 

excrements, which are well-known causes of respirator y allergies.

Note: To guarantee optimal dust retention and performance of the vacuum cleaner, always replace the 

HEPA filter with an original Philips filter of the correct type (see chapter ‘Ordering accessories’).

super Clean air hEPa 12 filter

Replace the Super Clean Air HEPA 12 filter ever y six months. This filter is not washable.

  1 

 Open the filter grille (Fig. 34).

English

10

Содержание

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Philips FC9060?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"